Read Panasonic KX-MB2230RU / KX-MB2270RU / KX-MB2510RU / KX-MB2540RU Service Manual online
111
KX-MB2230RU/ KX-MB2270RU/ KX-MB2510RU/ KX-MB2540RU
8.1.2.2.
Manual tray/Multi-purpose tray
• When printing from a computer, custom size recording paper can also be used.
• The unit is set for printing A4-size plain paper by default.
• The unit is set for printing A4-size plain paper by default.
- To use other paper sizes, change the recording paper size setting (feature #381).
- To use other paper types, change the recording paper type setting (feature #384).
- To use other paper types, change the recording paper type setting (feature #384).
• To print from the manual tray/multi-purpose tray, change the paper tray setting beforehand.
- Select “#2” for the printer properties when printing with the computer.
- Set the copy input tray setting to “#2” (feature #460) when making a copy.
- Set the copy input tray setting to “#2” (feature #460) when making a copy.
Manual tray
It can hold one sheet at a time. When printing or copying multiple sheets, add the next sheet after the first sheet has been fed into
the unit.
It can hold one sheet at a time. When printing or copying multiple sheets, add the next sheet after the first sheet has been fed into
the unit.
Important:
• To print on thick paper, label, envelope or Japan postcard:
- Be sure to open the rear cover before starting and print
one sheet at a time. The recording paper will be printed
out from the rear side. Therefore, if you print with the
cover closed, the paper may jam inside the unit.
out from the rear side. Therefore, if you print with the
cover closed, the paper may jam inside the unit.
- Be sure to close the rear cover after printing.
1.
Adjust the width of the guides (1) to the size of the recording paper.
• If the unit is in sleep mode, press a key to put the unit in standby
mode for the next process.
2.
Insert the paper, print-side up (2) until the unit grasps the paper and a
single beep is heard.
single beep is heard.
Note:
• The manual tray cannot be used for receiving faxes.
• If the copy input tray setting (feature #460) is not set
• If the copy input tray setting (feature #460) is not set
“#2”
before-
hand, when printing or copying multiple pages, the 1st page will be
printed from the manual tray, but the rest of the pages will be
printed from the standard input tray.
printed from the manual tray, but the rest of the pages will be
printed from the standard input tray.
Click on the first or last page to see other KX-MB2230RU / KX-MB2270RU / KX-MB2510RU / KX-MB2540RU service manuals if exist.