Read Panasonic KX-MB2110RUW / KX-MB2130RUW / KX-MB2170RUW / KX-MB2117RUB / KX-MB2137RUB / KX-MB2177RUB Service Manual online
80
KX-MB2110RUW/ KX-MB2130RUW/ KX-MB2170RUW/ KX-MB2117RUB/ KX-MB2137RUB/ KX-MB2177RUB
Note:
The numbers in the boxes (XXX) indicate the keys to be input for the various test modes.
10.1.1.
DTMF Single Tone Transmit Selection
Note:
After performing this check, do not forget to turn the setting off.
otherwise, dialing in DTMF signal will not work.
otherwise, dialing in DTMF signal will not work.
SENSOR CHECK
Service Mode
“8” “1” “5”
First of all, press the copy button, and confirm the action of ON/OFF.
For each sensor’s operation, refer to Sensors and Switches Section (P.56).
LCD DISPLAY:
For each sensor’s operation, refer to Sensors and Switches Section (P.56).
LCD DISPLAY:
D: Document
D: Document set
-: No document
-: No document
S: Read position
S: Document detect
-: No document
-: No document
C: Front cover
C: Cover open
-: Cover close
-: Cover close
: None
R: Registration
R: Paper detect
-: No paper
-: No paper
E: Paper exit
E: Paper detect
-: No paper
-: No paper
: None
T: Toner
T: Toner detect
-: No toner
-: No toner
: None
: None
: None
B: Rear cover
B: Cover open
-: Cover close
-: Cover close
: None
3F: Fuser thermistor
3F: 00 (high temp.) - FF (low temp.)
DF: Room thermistor
DF: 00 (high temp.) - FF (low temp.)
: None
: None
: None
T: Print timing
T: Paper detect
-: No paper
-: No paper
: None
: None
: None
: None
: None
: None
: None
: None
: None
A: ADU
A: Paper detect
-: No paper
-: No paper
: None
: None
: None
: None
: None
: None
: None
: None
: None
: None
: None
: None
: None
Test Mode
Type of Mode
Code
Function
Operation after code
input
Click on the first or last page to see other KX-MB2110RUW / KX-MB2130RUW / KX-MB2170RUW / KX-MB2117RUB / KX-MB2137RUB / KX-MB2177RUB service manuals if exist.