KX-MB2110RUW, KX-MB2130RUW, KX-MB2170RUW, KX-MB2117RUB, KX-MB2137RUB, KX-MB2177RUB - Panasonic Copying Equipment Service Manual (repair manual). Page 3

Read Panasonic KX-MB2110RUW / KX-MB2130RUW / KX-MB2170RUW / KX-MB2117RUB / KX-MB2137RUB / KX-MB2177RUB Service Manual online

3
KX-MB2110RUW/ KX-MB2130RUW/ KX-MB2170RUW/ KX-MB2117RUB/ KX-MB2137RUB/ KX-MB2177RUB
11.1. Programming and Lists ---------------------------------83
11.1.1. Operation ----------------------------------------------83
11.1.2. Operation Flow ---------------------------------------83
11.1.3. Service Function Table -----------------------------84
11.1.4. Memory Clear Specification -----------------------86
11.2. User Mode (The list below is an example of
the SYSTEM SETUP LIST the unit prints out.) ---87
11.3. Service Mode Settings (Example of a printed
out list) ---------------------------------------------------- 101
11.4. History (Example of a printed out list) ------------- 103
11.4.1. Descriptions of the History Report------------- 109
12 Troubleshooting Guide
-------------------------------------- 110
12.1. User Recoverable Errors ----------------------------- 110
12.2. Remote Programming  -------------------------------- 113
12.2.1. Entering the Remote Programming Mode
and Changing Service Codes ------------------ 114
12.2.2. Program Mode Table------------------------------ 115
12.3. Troubleshooting Details ------------------------------- 120
12.3.1. Outline ------------------------------------------------ 120
12.3.2. Starting Troubleshooting ------------------------- 120
12.3.3. Simple Check List --------------------------------- 121
12.3.4. Simplified Troubleshooting Guide ------------- 122
12.3.5. CALL SERVICE Troubleshooting Guide ----- 125
12.3.6. Print --------------------------------------------------- 133
12.3.7. Recording Paper Feed --------------------------- 139
12.3.8. ADF (Auto document feed) Section ----------- 145
12.3.9. Communication Section   ------------------------ 151
12.3.10. Special Service Journal Reports  -------------- 156
12.3.11. Initializing Error------------------------------------- 169
12.3.12. Analog Section (Fax supported models
only )  ------------------------------------------------- 170
12.3.13. Operation Panel Section ------------------------- 173
12.3.14. Sensor Section ------------------------------------- 173
12.3.15. Motor Section --------------------------------------- 179
12.3.16. LSU Section----------------------------------------- 182
12.3.17. CIS Control Section ------------------------------- 184
12.3.18. High Voltage Value Check Point --------------- 186
12.3.19. High Voltage Section------------------------------ 187
12.3.20. USB Section ---------------------------------------- 192
12.3.21. LAN Section  ---------------------------------------- 196
12.3.22. Main Board Section ------------------------------- 199
12.3.23. Low Voltage Power Supply Board (SMPS
Board)Section -------------------------------------- 200
12.3.24. Wireless LAN Section ---------------------------- 202
12.4. Recording Paper Jam --------------------------------- 203
12.4.1. When multiple sheets of recording paper
are fed at once. (Multiple Feed)---------------- 203
12.5. Document jams (Automatic document feeder)-- 203
13 Service Fixture & Tools
-------------------------------------- 204
14 Disassembly and Assembly Instructions
------------- 205
14.1. First of All ------------------------------------------------- 205
14.2. Flow Chart for Disassembly-------------------------- 206
14.3. Disassembly for Main Parts-------------------------- 207
14.3.1. Remove the Rear Cover ------------------------- 207
14.3.2. Remove the Front Cover------------------------- 207
14.3.3. Remove the Left Cover--------------------------- 208
14.3.4. Remove the Speaker and Handset Board
(with Handset  models only) -------------------- 209
14.3.5. Remove the Main Board ------------------------- 209
14.3.6. Remove the HVPS Board ----------------------- 210
14.3.7. Remove the Toner Board ------------------------ 210
14.3.8. Remove the Main Board Frame, Varistor
Board and SMPS Board --------------------------211
14.3.9. Remove the Antenna (V) Board (KX-
MB2170/2177 ONLY)----------------------------- 212
14.3.10. Remove the Right Cover ------------------------ 212
14.3.11. Remove the DC Motor --------------------------- 213
14.3.12. Remove the Varistor Board --------------------- 213
14.3.13. Remove the Sheet Gear Stopper (Clutch) -- 214
14.3.14. Remove the Main Drive ASSY. (Clutch) ----- 215
14.3.15. Remove the FAN Motor-------------------------- 216
14.3.16. Remove the Center Relay Board-------------- 216
14.3.17. Remove the Sheet Exit Gear------------------- 217
14.3.18. Remove the FB Unit ------------------------------ 218
14.3.19. Remove the ADF Unit (ADF Motor, ADF
Board) ------------------------------------------------ 219
14.3.20. Remove the FB Unit (FB-Motor)--------------- 221
14.3.21. Remove the Operation Board and LCD
Back Light Board  --------------------------------- 221
14.3.22. Remove the Top Cover -------------------------- 222
14.3.23. Remove the LSU Unit ---------------------------- 223
14.3.24. Remove the Antenna (H) Board (KX-
MB2170/2177 ONLY)----------------------------- 224
14.3.25. Remove the ADU Board and Resist Board - 225
14.3.26. Remove the Rear Board and Fuser Board - 227
14.4. Installation Position of The Lead ------------------- 228
14.4.1. Main Cabinet Section ---------------------------- 228
14.4.2. Side Cabinet Section (1) ------------------------ 229
14.4.3. Side Cabinet Section (2) ------------------------ 230
14.4.4. Side Cabinet Section (3) ------------------------ 231
14.4.5. Side Cabinet Section (4) ------------------------ 232
14.4.6. Side Cabinet Section (5) ------------------------ 233
14.4.7. Side Cabinet Section (6) ------------------------ 234
14.4.8. Side Cabinet Section (7) ------------------------ 235
14.4.9. Side Cabinet Section (8) ------------------------ 236
14.4.10. Side Cabinet Section (9) ------------------------ 237
14.4.11.  Side Cabinet Section (10)  (with Handset
models only) ---------------------------------------- 238
14.4.12.  Side Cabinet Section (11) [Main Boad and
Antenna Board](KX-MB2170/2177 ONLY)-- 239
14.4.13.  Side Cabinet Section (12) [Antenna 
Board] (KX-MB2170/2177 ONLY) ------------- 240
14.4.14.  Top Section (1) ------------------------------------ 241
14.4.15.   Top Section (2) ----------------------------------- 242
14.4.16.   Top Section (3) ----------------------------------- 243
14.4.17.   Top Section (4) ----------------------------------- 244
14.4.18.   FB Section (1) ------------------------------------ 245
14.4.19.   FB Section (2) ------------------------------------ 246
14.4.20.   FB Section (3) ------------------------------------ 247
14.4.21.   FB Section (4) ------------------------------------ 248
14.4.22.   FB Section (5) ------------------------------------ 249
14.4.23.   Fuser Section------------------------------------- 252
15 Maintenance
---------------------------------------------------- 253
15.1. Maintenance Items and Component Locations- 253
15.1.1. Outline ----------------------------------------------- 253
15.1.2. Maintenance Check Items/Component 
Locations -------------------------------------------- 253
15.2. Maintenance--------------------------------------------- 255
15.3. Printing Operation Principle ------------------------- 256
15.3.1. Process Chart and Process BIAS------------- 256
15.3.2. Charging--------------------------------------------- 256
15.3.3. Exposing--------------------------------------------- 257
Page of 127
Display

Click on the first or last page to see other KX-MB2110RUW / KX-MB2130RUW / KX-MB2170RUW / KX-MB2117RUB / KX-MB2137RUB / KX-MB2177RUB service manuals if exist.