Read Panasonic KX-CL500 / KX-CL510 (serv.man4) Service Manual Supplement online
3 Modification of Section 8 Removal and Replacement
Procedures
3.1. Modification of Section 8.6.5 Main Drive Unit
The section 8.6.5 Main Drive Unit has been changed for reassembling the main drive unit accurately. When servicing, repairing,
disassembling or reassembling the main drive unit, read the following new descriptions for the section 8.6.5 Main Drive Unit.
disassembling or reassembling the main drive unit, read the following new descriptions for the section 8.6.5 Main Drive Unit.
3.1.1. Inner Cover, ADU Jam Detection Sensor Board and ADU Detection Sensor
(1) Remove the inner cover (2 screws).
(2) Disconnect the 2 connectors from the inner cover.
(3) Remove the fuser earth plate (1 screw).
(4) If necessary, remove the ADU jam detection sensor board
and ADU detection sensor.
3.1.2. Main Drive Unit
(1) Remove the 7 screws, securing the main drive unit.
(2) If necessary, disconnect the 2 motor cables.
(3) Separate the main drive unit from the chassis.
(4) If necessary, disconnect the sensor cable from the main
drive unit.
Note: For easy reinstalling the main drive unit
When reinstalling the main drive unit, see the
section 8.10 “Paper Feed Unit” and remove a clip
and the registration clutch from the paper feed unit.
section 8.10 “Paper Feed Unit” and remove a clip
and the registration clutch from the paper feed unit.
After reinstalling the main drive unit, reinstalling the
registration clutch and a clip to the paper feed unit.
registration clutch and a clip to the paper feed unit.
2
KX-CL500 / KX-CL510
Click on the first or last page to see other KX-CL500 / KX-CL510 (serv.man4) service manuals if exist.