Read Panasonic KX-CL400 Service Manual online
8.7.2. Sub Fuser Fan and Sub Fuser Fan Duct
(1) Remove the sub fuser fan (2 screws).
(2) Disconnect the fan cable from the sub fuser fan.
(3) Disconnect the CMY cable from the CMY motor.
(4) Remove the sub fuser fan duct (2 screws).
8.7.3. Toner Cartridge Drive Unit, Toner Cartridge Holder and Fuser Fan Duct Assembly
Caution:
In the toner cartridge holder assembly, the toner is stored. Remove or handle the toner cartridge holder assembly,
using care that toner is not spilled.
using care that toner is not spilled.
When removing the toner cartridge holder, first remove the toner cartridge drive unit to prevent the toner from spill,
then remove the toner cartridge holder.
then remove the toner cartridge holder.
(1) Remove the 2 screws from the toner cartridge drive unit.
(2) Separate the toner cartridge drive unit from the chassis.
(3) Disconnect the toner empty sensor cable from the toner
cartridge drive unit.
(4) Remove the PC guide (1 screw).
(5) Remove the 2 screws from the toner cartridge holder
assembly.
(6) Release the bundled cables by unlatching the cable
clamper on the toner cartridge holder assembly.
(7) If necessary, cut the 3 plastic belts to release the toner
supply solenoid cable from the bundled cables.
(8) Remove the toner cartridge holder assembly (see note).
Note:
The toner cartridge holder assembly is fixed to the chassis frame by 4 hooks. When removing the toner cartridge holder
assembly, move it in the arrow direction (1) and (2) to release the hooks from the chassis frame.
assembly, move it in the arrow direction (1) and (2) to release the hooks from the chassis frame.
124
KX-CL400
Click on the first or last page to see other KX-CL400 service manuals if exist.