Read Panasonic KV-S2087 Service Manual online
20
7.2.
Paper Feed Mechanism (Manual)
When scanning multipart paper with the Manual Feed Selector set to "AUTO" the DFP Roller is pressed against the Separation
Roller, and this results in a separating force being applied to the document, which will separate the layers, resulting in damage to
the document.
This problem can be avoided by scanning multipart paper with the Manual Feed Selector set to "Manual".
With "MANUAL" set, the DFP Roller's gear is released from the Paper Feed Motor drive, and so multipart paper can be fed and
scanned as if it were a single sheet of paper. (In this case, the DFP Roller operates as a free roller.)
Roller, and this results in a separating force being applied to the document, which will separate the layers, resulting in damage to
the document.
This problem can be avoided by scanning multipart paper with the Manual Feed Selector set to "Manual".
With "MANUAL" set, the DFP Roller's gear is released from the Paper Feed Motor drive, and so multipart paper can be fed and
scanned as if it were a single sheet of paper. (In this case, the DFP Roller operates as a free roller.)
1. The lever is changed to Manual.
2. The reverse drive for DFP roller is released.
3. DFP roller is pushed up by the pressure from the bottom of DFP Roller Holder.
4. The DFP roller is pressed into Separation Roller. DFP roller operates like a Free Roller in Manual Mode.
5. The Paper Feed Roller moves down until the roller is in contact with the documents.
2. The reverse drive for DFP roller is released.
3. DFP roller is pushed up by the pressure from the bottom of DFP Roller Holder.
4. The DFP roller is pressed into Separation Roller. DFP roller operates like a Free Roller in Manual Mode.
5. The Paper Feed Roller moves down until the roller is in contact with the documents.
Note:
Do not scan bound paper with the Manual Feed Selector set to "AUTO".
When scanning bound paper, be sure the Manual Feed Selector is set to "MANUAL".
Do not scan bound paper with the Manual Feed Selector set to "AUTO".
When scanning bound paper, be sure the Manual Feed Selector is set to "MANUAL".
Manual
Auto
Auto Mode
Manual Mode
Manual
Auto
Paper Feed Roller
DFP Roller
1
2
3
4
5
Separation Roller
Click on the first or last page to see other KV-S2087 service manuals if exist.