KV-S2087 (serv.man2) - Panasonic Copying Equipment Service Manual (repair manual). Page 15

15

The status of the scanner is displayed by the LED (Red) (

) and the LED (Green) (

), as shown in the

table below:

LED (Red)

LED (Green)

Status

OFF

OFF

Power OFF

*1

OFF

Blinking (Fast)

Warming up

OFF

ON

Ready mode or Scanning

Blinking (Slow)

ON

Notification mode

OFF

Blinking (Slow)

Sleep mode

*2

 or Cleaning mode

Blinking (Slow)

Blinking (Slow)

Sleep mode

*2

 and Notification mode

ON

OFF

Error

*3

OFF

Blinking (Fast, 2 times consecutively)

Double feed skip mode

OFF

Blinking (Fast, 3 times consecutively)

Dog-ear Detection Skip mode

*1

If the power off feature in sleep mode is enabled, and if no operation is performed for a certain period of time, the scanner will be
turned off automatically. Press the power button of the scanner to turn it on. You can enable/disable the power off feature, and
change the time until the scanner turns off in User Utility.

*2

If no operation is performed for 15 minutes or longer, the scanner will enter sleep mode automatically to conserve energy. Press
any button (except the power button) on the scanner’s operation panel to return to ready mode. The time until the scanner enters
sleep mode can be changed in User Utility.

*3

For details about the error, refer to "Error Messages" (Operating Manual P.68) or check in User Utility.

The status of the unit is displayed on the LCD as follows.

The scanner is warming up.

The USB cable is not connected.

123

The Scanner status and scanning counter are displayed.

G: nn
GROUP NAME

Group number (two-digit) and Group name of job

J: nn
JOB NAME

Job number (two-digit) and Job name

U: nn
MESSAGE

Error number (two-digit) and Error message

F: nn
MESSAGE

Error number (two-digit) and Error message (System error)