Read Panasonic KV-S1026C / KV-S1015C (serv.man2) Service Manual Supplement online
2
KV-S1026C/KV-S1015C
1 CHANGES
1.1.
Subject
KV-S1015C/-B/-U/-X/KV-S1026C-B/-X
KV-S1015C-SX/KV-S1026C-SX
KV-S1026C-J
KV-S1026C/-U
SUFFIX LOCATION
1.2.
Replacement Parts List
Suffix
Reason for suffix change
C to D
Change parts for EAC standard
Suffix
Reason for suffix change
D to E
Change parts for EAC standard
Suffix
Reason for suffix change
B to C
CD-ROM Software Version up
Suffix
Reason for suffix change
C to D
Change parts for EAC standard
D to E
CD-ROM Software Version up
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code
Parts
Set Production
A Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
B Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
C Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
D Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
E
Addition
F
Deletion
G
Other
Ref. No.
Part No.
Part Name & Description
Remarks
Notes
Time of change
(Suffix)
Original (Old)
New
Upper chassis
71
71
PNZES1261M
PNZES1261M1
Adjustment conveyor with
scanning glass(B)
scanning glass(B)
8
C
―
Lower chassis
144
144
PNWPS1150M
PNWPS1150M1
CONTROL Board for KV-S1015C
Series
Series
8
A
―
144
PNWPS1260M
PNWPS1260M1
CONTROL Board for KV-S1026C
Series
Series
8
A
―
Click on the first or last page to see other KV-S1026C / KV-S1015C (serv.man2) service manuals if exist.