FP-7818, FP-7824, FP-7830, FP-7835, FP-7845, FP-7850, FA-S620, FA-S660, FA-DS72, FA-DS82 - Panasonic Copying Equipment Service Manual (repair manual). Page 7

Read Panasonic FP-7818 / FP-7824 / FP-7830 / FP-7835 / FP-7845 / FP-7850 / FA-S620 / FA-S660 / FA-DS72 / FA-DS82 Service Manual online

For U.K.
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This appliance is supplied with a moulded three pin mains plug for your safety and
convenience.  A 13 amp fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating
of 13 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark       or the BSI mark     on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse
is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained.
A replacement fuse cover can be purchased from your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR
OFFICE THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND
DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS
INSERTED INTO ANY 13 AMP SOCKET.
If a new plug is to be fitted please observe the wiring code as shown below.
If in any doubt please consult a qualified electrician.
WARNING:
 
THIS APPLIANCE MUST BE EARTHED.
IMPORTANT:
 
The wires in this mains lead are coloured in accordance with the following
code:
Green and Yellow
:Earth
Blue
:Neutral
Brown
:Live
As the colours of the wires in the main lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the
plug which is marked by letter E or by the safety EARTH symbol “   ” or coloured GREEN or
GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is
marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which is
marked with the letter L or coloured RED.
How to replace the fuse.
Open the fuse compartment with a screwdriver and replace the fuse.
Fuse
Fuse
iii
Page of 127
Display

Click on the first or last page to see other FP-7818 / FP-7824 / FP-7830 / FP-7835 / FP-7845 / FP-7850 / FA-S620 / FA-S660 / FA-DS72 / FA-DS82 service manuals if exist.