Read Panasonic FA-DS72 / FA-DS82 / FA-MA301 Service Manual online
6-3
Installation
Set the LCC onto the rail and install the
fixing screws.
(2screws)
Locations
Shipping material/ Procedure
Check
4
5
Connect the lattice connector of the LCC
to the copier.
* When the system console is
installed, connect the connector of
the system console to the LCC.
SU003
SU012
Side-to-side adjustment
Before adjustment, make sure that the
copier is operating properly.
Loosen the two screws of the LCC rail,
and move it front or rear accordingly.
Location
Shipping material / Pocedure
Check
1
SU007
6.3 Adjustment
2
2
1
2
Height adjustment
Check the gap between the copier and
LCC.
Gap "A" and "B" should be equal.
If they are not equal, adjust the two
adjusting feet.
Lock the adjusting feet into position with
the nut on each foot.
2
2
3
1
SU013
Click on the first or last page to see other FA-DS72 / FA-DS82 / FA-MA301 service manuals if exist.