Read Panasonic DP-1520P / DP-1820P / DP-1820E (serv.man3) Other Service Manuals online
Digital Imaging Systems
DP-1520P/1820P/1820E
[ Version 1.0 ]
This service information is designed for experienced repair technicians only and is not intended for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service
or repair the product or products dealt within this service information by anyone else could result in serious injury or death.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product.
Products powered by electricity should be serviced or repaired only by experienced professional technicians. Any attempt to service
or repair the product or products dealt within this service information by anyone else could result in serious injury or death.
WARNING
2
General Annotations
1. Panasonic Digital Document Company and other Panasonic Sales Companies reserve
the right to change any information enclosed herein without prior notification.
(This includes, but is not limited to, parts pricing, availability, and text)
the right to change any information enclosed herein without prior notification.
(This includes, but is not limited to, parts pricing, availability, and text)
2. Electrical parts supplied may include previously used components.
3.
Important Safety Notice
Components identified by a mark, have special characteristics important for safety.
When replacing any of these components, use only manufacturer’s specified parts.
When replacing any of these components, use only manufacturer’s specified parts.
4. In New Parts column, "N" indicates part is used only in DP-1520P/1820P/1820E models,
"C" indicates part is used in previous models.
"C" indicates part is used in previous models.
5. In Remarks column, "PM" indicates “Preventive Maintenance Part".
6. In Remarks column, "RTL" indicates that the Retention Time is limited for this item. After
the discontinuation of this assembly in production, the item will continue to be available for
a specific period of time. The retention period of availability is dependant on the type of
assembly, and in accordance with the laws governing part and product retention.
After the end of this period, the assembly will no longer be available.
the discontinuation of this assembly in production, the item will continue to be available for
a specific period of time. The retention period of availability is dependant on the type of
assembly, and in accordance with the laws governing part and product retention.
After the end of this period, the assembly will no longer be available.
7. This “Unit" which includes other itemized parts is provided as “Limited Availability" for your
convenience, and will only be offered for up to 3 years after the production of the unit
ceases. However, the individual contents of the assembly will be available for the standard
period.
convenience, and will only be offered for up to 3 years after the production of the unit
ceases. However, the individual contents of the assembly will be available for the standard
period.
8. This Product Uses Lead (Pb) Free Solder Printed Circuit Boards (PCBs).
Information regarding Lead-Free (PbF) solder;
Information regarding Lead-Free (PbF) solder;
Distinction of PbF PCB:
PCBs (manufactured) using lead free solder will have a mark following
the PCB part numbers in a label on the PCB.
the PCB part numbers in a label on the PCB.
Caution:
Pb free solder has a higher melting point than standard solder; typically the melting
point is 50 - 70 F (30 - 40 C) higher. Please use a soldering iron with temperature
control and adjust it to 700 20 F (370 10 C). Exercise care while using higher
temperature soldering irons, do not heat the PCB for too long to prevent solder splash
or damage to the PCB.
control and adjust it to 700 20 F (370 10 C). Exercise care while using higher
temperature soldering irons, do not heat the PCB for too long to prevent solder splash
or damage to the PCB.
Pb free solder will tend to splash when heated too high (about 1100 F/600 C).
ECO SOLDER M705 (available from Senju Metal Industry Co., Ltd.;
ECO SOLDER M705 (available from Senju Metal Industry Co., Ltd.;
URL:
http://www.senju-m.co.jp
) is recommended when repairing PbF PCBs.
The contents of this Service Manual and the Specifications are
subject to change
without notice. Panasonic Communications Co., Ltd. reserves the right to make
improvements in the product design without reservation and without notice.
Published in Japan.
improvements in the product design without reservation and without notice.
Published in Japan.
Table of Contents
3
Exploded View & Parts List........................ 5
1.1.
Destination Codes ....................................5
1.2.
Cover Assembly........................................6
1.3.
Scanner Unit ...........................................10
1.4.
Control Panel Unit...................................14
1.5.
Paper Transportation ..............................18
1.6.
Automatic Duplex Unit ............................22
1.7.
Electrical Parts........................................26
1.8.
Frame Parts ............................................30
1.9.
Fuser Unit ...............................................34
1.10. Hopper Unit.............................................38
1.11. Developer Unit ........................................40
1.12. Drum Unit................................................44
1.13. Drive Unit ................................................48
1.14. Paper Tray ..............................................52
1.15. Automatic Document Feeder ..................54
1.16. Inverting Automatic Document Feeder
1.11. Developer Unit ........................................40
1.12. Drum Unit................................................44
1.13. Drive Unit ................................................48
1.14. Paper Tray ..............................................52
1.15. Automatic Document Feeder ..................54
1.16. Inverting Automatic Document Feeder
(For DP-1820E) ......................................62
1.17. PC Boards/Harnesses ............................78
1.18. 2nd/4th Paper Feed Module ...................84
1.19. 3rd Paper Feed Module ..........................90
1.20. Packing and Accessories........................96
1.21. Printer Controller Module
1.18. 2nd/4th Paper Feed Module ...................84
1.19. 3rd Paper Feed Module ..........................90
1.20. Packing and Accessories........................96
1.21. Printer Controller Module
for PCL6................................................100
1.22. Printer Controller Module
for PS/PCL6..........................................102
1.23. Network Scanner Module .....................104
1.24. Internet Fax/E-Mail Module...................106
1.25. Fax Communication Board ...................108
1.26. Keyboard Option...................................110
1.27. Hard Disk Drive Unit .............................112
1.28. Accounting Software.............................114
1.29. i-ADF Packing and Accessories ...........116
1.30. ADF Packing and Accessories .............118
1.31. 2nd/4th Paper Tray and
1.24. Internet Fax/E-Mail Module...................106
1.25. Fax Communication Board ...................108
1.26. Keyboard Option...................................110
1.27. Hard Disk Drive Unit .............................112
1.28. Accounting Software.............................114
1.29. i-ADF Packing and Accessories ...........116
1.30. ADF Packing and Accessories .............118
1.31. 2nd/4th Paper Tray and
3rd Paper Tray
Packing and Accessories......................120
Packing and Accessories......................120
1.32. Dehumidifier Heater Kit
(For Main Unit)......................................122
1.33. Dehumidifier Heater Kit
(For Optional Paper Tray(s)).................124
1.34. Key Counter Harness Kit .....................126
1.35. Hardware Identification Template .........128
1.35. Hardware Identification Template .........128
4
memo
