Read Panasonic TX-P50X60E / TX-PR50X60 Service Manual online
23
8.2.
Disassembly Procedure for the Unit
8.2.1.
Remove the Pedestal stand
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the screws (
×4 ).
3. Slide the Pedestal stand to the downside and remove the
Pedestal stand.
8.2.2.
Remove the AC cord clamper B
1. Remove the screws (
×2
) and remove the AC cord
clamper B.
8.2.3.
Remove the Rear cover
1. Remove the screws (
×24 ,
×6 ,
×3 ).
2. Remove the M8 caps (
×4 ).
3. Remove the Rear cover.
8.2.4.
Remove the Key button
1. Remove the screws (
×2 ).
2. Remove the Key button.
8.2.5.
Remove the PSS-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
discharge from electrolysis capacitors.
1. Unlock the cable clampers, the hooks and the tapes to
free the cables.
2. Disconnect the connectors (P2 and P35).
3. Disconnect the bridge connector (A6A-P6).
4. Disconnect the flexible cables (SS52 and SS55).
5. Remove the screws (
3. Disconnect the bridge connector (A6A-P6).
4. Disconnect the flexible cables (SS52 and SS55).
5. Remove the screws (
×5 ,
×1 ,
×1 )
and
remove
the PSS-Board.
Click on the first or last page to see other TX-P50X60E / TX-PR50X60 service manuals if exist.