TX-P50X60E, TX-PR50X60 - Panasonic Plasma Service Manual (repair manual). Page 14

14

1. Select [DRV Check - USBHDD Check] in Service Mode.
2. Press [OK] button on the remote control for more than 3 seconds.

1. Purpose

Restrict a function for hotels.

2. Access command to the Hotel mode setup menu

In order to display the Hotel mode setup menu:
While pressing [VOLUME (-)] button of the main unit, 
press [AV] button of the remote control three times within 
2 seconds.

Then, the Hotel mode setup menu is displayed.

3. To exit the Hotel mode setup menu 

Switch off the power with the [POWER] button on the 
main unit or the [POWER] button on the remote control.

4. Explain the Hotel mode setup menu

Item

Function

Hotel Mode

Select hotel mode On/Off

Initial INPUT

Select input signal modes.
Set the input, when each time power is switched 
on.
Selection :
Off,Analogue,DVB-C,DVB-T,AV1,AV2,
HDMI1,HDMI2

• Off: give priority to a last memory. However,

Euro model is compulsorily set to TV.

Initial POS

Select programme number.
Selection :
 Off/0 to 99

• Off: give priority to a last memory

Initial VOL Level

Adjust the volume when each time power is 
switched on.
Selection/Range :
Off/0 to 100

• Off: give priority to a last memory

Maximum VOL 
Level

Adjust maximum volume.
Range : 
 0 to 100

Button Lock

Select local key conditions.
Selection : 
 Off/SETUP/MENU

• Off: altogether valid
• SETUP: only F-key is invalid

(Tuning guide (menu) can not be selected.)

• MENU: only F-key is invalid

(only Volume/Mute can be selected.)

Remote Lock

Select remote control key conditions.
Selection :
 Off/SETUP/MENU

• Off: altogether valid
• SETUP: only Setup menu is invalid
• MENU: Picture/Sound/Setup menu are invalid