TX-P50G20E, TX-P50G20ES, TX-PF50G20S, TX-PR50G20 - Panasonic Plasma Service Manual (repair manual). Page 26

26

1. Remove the SU-Board and SD-Board. (See section 9.8.

and 9.9.)

2. Unlock the cable clampers to free the cable.
3. Disconnect the connector (SC2).
4. Disconnect the flexible cable (SC20).
5. Remove the screws (

×7 ) and remove the SC-Board.

1. Remove the Tuner unit. (See section 9.5.)
2. Disconnect the bridge connector (SS21-SS24) and dis-

connect the flexible cable (SS58).

3. Remove the screws (

×2 

) and remove the SS2-Board. 

1. Remove the Tuner unit. (See section 9.5.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (SS11 and SS33).
4. Disconnect the flexible cables (SS53 and SS56).
5. Disconnect the bridge connector (SS21-SS24).
6. Remove the screws (

×6 

) and remove the SS-Board.

1. Remove the Plasma panel section from the servicing

stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.

2. Remove the One leg bracket fastening screws (

×4 )

and the One leg bracket.

3. Remove the Hanger metals (L, R) fastening screws (

×2

 each) and remove the Hanger metals (L, R).