Read Panasonic TH-R42PY8R Other Service Manuals online
23
3. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
4. Remove the spacers and spacer rings (
×6 ).
Caution:
• Please confirm the installation place of Spacer and
Spacer Ring when you exchange the Plasma Panel, and
install Spacer and Spacer Ring in an original installation
place after exchanging the Plasma Panel.
install Spacer and Spacer Ring in an original installation
place after exchanging the Plasma Panel.
7.20. Remove the S-Board
1. Remove the Cabinet assy. (See section 7.19.)
2. Disconnect the connector (S1).
3. Remove the screws (
2. Disconnect the connector (S1).
3. Remove the screws (
×2
) and remove the S-Board
metal frame.
4. Remove the screws (
×2
) and remove the S-Board.
7.21. Remove the K-Board
1. Remove the Cabinet assy. (See section 7.19.)
2. Remove the S-Board. (See section 7.20.)
3. Remove the screws (
2. Remove the S-Board. (See section 7.20.)
3. Remove the screws (
×2 ).
4. Disconnect the connector (K1) and Remove the K-Board.
Click on the first or last page to see other TH-R42PY8R service manuals if exist.