Read Panasonic TH-65PF11EK Service Manual online
21
TH-65PF11EK
8.8.
Removal of DN-Board
1. Disconnect the connectors (DN3, DN5, DN9, PB31,
PB32, PB33, PB34, PB35, PB36, PB38).
2. Remove the flexible cables from the connectors (DN1,
DN2).
3. Remove 4 screws and then remove the DN-Board Block.
4. Remove 2 screws ( ) and then remove the PB-Board
Block.
5. Remove 2 screws ( ) and then remove DN-Board.
Note:
A re-setup of the destination is performed by MS
mode after DN-Board exchange.
mode after DN-Board exchange.
8.9.
Removal of D-Board
1. Remove the DN-Board Block.
(Refer to Removal of DN-Board)
2. Disconnect the connectors (D3, D5, D25).
3. Remove the flexible cables from the connectors (D20,
3. Remove the flexible cables from the connectors (D20,
D31, D32, D33, D34, D35, D36).
4. Remove 4 screws and then remove D-Board.
8.10. Removal of P-Board
1. Disconnect the connectors (P2, P6, P7, P9, P11, P12,
P25).
2. Remove 8 screws and then remove P(MULTI)Board,
P(SUS)Board and Fixed Plate.
Click on the first or last page to see other TH-65PF11EK service manuals if exist.