Read Panasonic TH-50PV600E / TH-50PX600B Service Manual online
6.34. Remove the K-Board
1. Remove the front frame. (See section 6.32.)
2. Remove the glass holder R and L. (See section 6.33.)
3. Remove the screws (×3
)
4. Remove the bottom shield.
5. Remove the screws (×5
)
6. Remove the glass holder bottom R and L.
7. Remove the screws (×9
)
8. Remove the glass holder bottom.
9. Remove the screws (×2
).
10. Disconnect the couplers (K1).
11. Remove the K-board.
6.35. Replace the plasma panel
(finished)
1. Place the new plasma panel (finished) on the flat surface of
the table (covered by a soft cloth), with the plasma panel
surface facing downward.
surface facing downward.
2. Attach the C1, C2, C3, C4, C5 and the C6-Board, connect
the flexible cables (×22) from the Plasma panel to the C1,
C2, C3, C4, C5 and the C6-Board, and fit the flexible cable
holders.
C2, C3, C4, C5 and the C6-Board, and fit the flexible cable
holders.
3. Attach the Hooks (left, right) and fit the stand brackets (L,
R) to the new plasma panel.
4. Place the plasma panel section on the servicing stand.
5. Attach the front frame and each P.C.Board and so on, to
the new plasma panel.
* When fitting the front frame, be careful to allow any
debris, dust or handling residue to remain between the
front glass and plasma panel.
debris, dust or handling residue to remain between the
front glass and plasma panel.
20
TH-50PV600E / TH-50PX600B
Click on the first or last page to see other TH-50PV600E / TH-50PX600B service manuals if exist.