Read Panasonic TH-50PV600E / TH-50PX600B Service Manual online
6.6. Remove the P-Board
Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
discharge from electrolysis capacitors.
1. Disconnect the couplers (P2, P5, P9, P10, P11, P12, P23
and P25).
2. Remove the screws (×6
) and remove the P-Board unit.
3. Remove the screws (×9
) on the back side.
4. Remove the screws (×5
).
5. Remove the molding props (×8
).
6. Remove the P-Board.
Note:
When assembling the P-Board, the position of each hole of
the insulation sheets (A and B) is set to the position of each
hole of the P-Board, then assemble them. (
the insulation sheets (A and B) is set to the position of each
hole of the P-Board, then assemble them. (
marks
indicate setting positions.)
11
TH-50PV600E / TH-50PX600B
Click on the first or last page to see other TH-50PV600E / TH-50PX600B service manuals if exist.