Read Panasonic TH-50PF11EK Service Manual online
21
TH-50PF11EK
8.8.
Removal of DN-Board
1. Disconnect the connectors (DN3, DN5, DN9, PB31,
PB32, PB33, PB34, PB35, PB38).
2. Remove the flexible cables from the connectors (DN1,
DN2).
3. Remove 4 screws and then remove the DN-Board Block.
4. Remove 2 screws ( ) and then remove the PB-Board
Block.
5. Remove 2 screws ( ) and then remove DN-Board.
Note:
A re-setup of the destination is performed by MS
mode after DN-Board exchange.
mode after DN-Board exchange.
8.9.
Removal of D-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Disconnect the connectors (D3, D5, D25).
3. Remove the flexible cables from the connectors (D20,
3. Remove the flexible cables from the connectors (D20,
D31, D32, D33).
4. Remove 4 screws and then remove D-Board.
8.10. Removal of P-Board
1. Disconnect the connectors (P2, P6, P7 P9, P11, P12,
P25).
2. Remove 6 screws ( ) and then remove P-Board (MAIN)
and Fixed Plate.
3. Remove 6 screws ( ) and then remove P-Board (AC).
8.11. Removal of Speaker Terminal
Block (L, R)
1. Remove 2 screws and then remove the Speaker Terminal
Block (L, R).
2. Disconnect the connector (H37).
3. Remove 6 screws (O) and then remove the H3-Board.
3. Remove 6 screws (O) and then remove the H3-Board.
Click on the first or last page to see other TH-50PF11EK service manuals if exist.