Read Panasonic TH-46PY80PA / TH-46PZ80BA / TH-46PZ80EA Service Manual online
22
7.12. Remove the Stand brackets
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered)
with the Plasma panel surface facing downward.
with the Plasma panel surface facing downward.
2. Remove the Stand brackets (L, R) fastening screws (
×5
each) and remove the Stand brackets (L, R).
7.13. Remove the D-Board
1. Remove the Tuner unit. (See section 7.6.)
2. Disconnect the connectors (D3, D5 and D25).
3. Disconnect the flexible cables (D20, D31, D32 and D33).
4. Remove the screws (
2. Disconnect the connectors (D3, D5 and D25).
3. Disconnect the flexible cables (D20, D31, D32 and D33).
4. Remove the screws (
×4
) and remove the D-Board.
7.14. Remove the C1-Board
1. Remove the Tuner unit. (See section 7.6.)
2. Remove the Stand bracket R. (See section 7.12.)
3. Remove the DD-Heat-sink fastening screws (
2. Remove the Stand bracket R. (See section 7.12.)
3. Remove the DD-Heat-sink fastening screws (
×12 ).
4. Remove the DD-Heat-sink (
×6).
5. Disconnect the flexible cables (CB1, CB2, CB3, CB4,
CB5 and CB6).
6. Disconnect the flexible cables (C10 and C11).
7. Remove the screws (
7. Remove the screws (
×5
) and remove the C1-Board.
7.15. Remove the C2-Board
1. Remove the Tuner unit. (See section 7.6.)
2. Remove the stand bracket L. (See section 7.12.)
3. Remove the DD-Heat-sink fastening screws (
2. Remove the stand bracket L. (See section 7.12.)
3. Remove the DD-Heat-sink fastening screws (
×10 ).
4. Remove the DD-Heat-sink (
×5).
5. Disconnect the flexible cables (CB7, CB8, CB9, CB10
and CB11).
6. Disconnect the flexible cables (C20, C21, C22 and C26).
7. Remove the screws (
7. Remove the screws (
×5
) and remove the C2-Board.
Click on the first or last page to see other TH-46PY80PA / TH-46PZ80BA / TH-46PZ80EA service manuals if exist.