Read Panasonic TH-42PH10BK / TH-42PH10BS / TH-42PH10EK / TH-42PH10ES Service Manual online
8.1. Driver Set-up
8.1.1. Item / Preparation
1. Set Aging pattern 0 (Vset ajustment pattern) by IIC mode.
2. Set the picture controls as follows.
2. Set the picture controls as follows.
Picture menu: Standard
Picture: +25
Aspect: Full
Picture: +25
Aspect: Full
Caution
1. First perform Vsus adjustment.
2. Confirmation of Vscn voltage should be performed after
2. Confirmation of Vscn voltage should be performed after
confirmation of Vad adjustment.
When Vad=-105V, Voltage of Vscn is 40V ±4V.
When Vad=-105V, Voltage of Vscn is 40V ±4V.
8.1.2. Adjustments
Adjust driver section voltages. (Refer to the panel data on the
panel data label).
Check or adjust the following voltages with the multimeter.
panel data label).
Check or adjust the following voltages with the multimeter.
Name
Test Point
Voltage
Volume
Remarks
Vsus
TPVSUS
(SS)
(SS)
Vsus ± 2V
R628 (P)
*
Ve
TPVE (SS)
Ve ± 1V
VR6000 (SS)
*
Vset
TPVSET
(SC)
(SC)
330V ± 7V
Fixed
Vad
TPVAD (SC) -105V ± 1V
VR6600 (SC)
Vscn
TPVSCN
(SC)
(SC)
Vad+145V ±
4V
4V
Fixed
Vda
TPVDA (SS) 75V + 1V, -2V Fixed
PFC
C446 (+)(-)
396V ± 0.5V
R443 (P)
*See the Panel label.
8 Adjustment Procedure
21
TH-42PH10BK / TH-42PH10BS / TH-42PH10EK / TH-42PH10ES
Click on the first or last page to see other TH-42PH10BK / TH-42PH10BS / TH-42PH10EK / TH-42PH10ES service manuals if exist.