Read Panasonic TH-42PD12E Service Manual online
28
TH-42PD12E
10 Measurements and Adjustments
10.1. Adjustment Procedure
10.1.1. Driver Set-up
10.1.1.1. Item / Preparation
1. Set Aging pattern (white pattern signal) by IIC mode.
2. Set the picture controls as follows.
2. Set the picture controls as follows.
Picture menu: Standard
Picture: +25
Aspect: Full
Picture: +25
Aspect: Full
Caution
1. First perform Vsus adjustment.
2. Confirmation of Vscn voltage should be performed after
2. Confirmation of Vscn voltage should be performed after
confirmation of Vad adjustment.
When Vad=-180V, Voltage of Vscn is -35V ±4V.
When Vad=-180V, Voltage of Vscn is -35V ±4V.
10.1.1.2. Adjustments
Adjust driver section voltages. (Refer to the panel data on the
Panel Label).
Check or adjust the following voltages with the multimeter.
Panel Label).
Check or adjust the following voltages with the multimeter.
*See the Panel Label.
Name
Test Point
Voltage
Volume
Remarks
Vsus
TPVSUS
(SS)
(SS)
Vsus ± 2V
R737 (P)
*
Ve
TPVE (SS)
Ve ± 2.5V
Fixed
*
Vset
TPVSET
(SC)
(SC)
290V ± 9V
Fixed
Vad
TPVAD (SC) -180V ± 2V
VR16600
(SC)
(SC)
Vscn
TPVSCN
(SC)
(SC)
Vad_base:
+145V±4V
GND_base:
-35V±6V
+145V±4V
GND_base:
-35V±6V
Fixed
Vda
TPVDA (P)
60V +1V , -2V Fixed
Click on the first or last page to see other TH-42PD12E service manuals if exist.