Read Panasonic TH-152UX1 / TH-152UX1W / TH-152UX1C Service Manual online
10
TH-152UX1 / TH-152UX1W / TH-152UX1C
4 Specifications
Power Source
200-240 V AC, 50/60Hz
Power Consumption
Power on
3700W
Stand-by condition
0.5 W
Power off condition
0.3 W
Plasma Display panel
Drive method : AC type
152-inch, 17:9 aspect ratio
152-inch, 17:9 aspect ratio
Screen size
134.4 inch (3,416 mm) (W) x 70.9 inch (1,801 mm) (H) x 152.0 inch(3,862 mm) (diagonal)
(No. of pixels)
8,847,360 (4,096 (W) x 2,160 (H))
[4,096 x 2,160 x 3 dots]
[4,096 x 2,160 x 3 dots]
Operating condition
Temperature
32
°F - 95 °F (0 °C - 35 °C)
Humidity
20 % - 80 %
Applicable signals
Scanning format
525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) /
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i
PC signals
VGA, SVGA, XGA, SXGA
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
UXGA ..... (compressed)
Horizontal scanning frequency 15 - 110 kHz
Vertical scanning frequency 48 - 120 Hz
Connection terminals
AV IN
HDMI 1/2 TYPE A Connector x 2
HDMI (Version 1.4 with 3D)
SDI IN
*1
BNC
HD-SDI (Dual Link) x 4, 4K signal input
HD-SDI (Dual Link) x 4, 4K signal input
0.8 Vp-p (75-ohm)
DVI-D IN
*1
DVI-D (Single Link) 24 Pin x 4, 4K signal input
Compliance with DVI Revision 1.0
PC IN
High-Density Mini D-sub 15 Pin
G with sync 1.0 Vp-p (75-ohm)
G without sync 0.7 Vp-p (75-ohm)
B: 0.7 Vp-p (75-ohm)
R: 0.7 Vp-p (75-ohm)
HD/VD: 1.0 - 5.0 Vp-p (high impedance)
G without sync 0.7 Vp-p (75-ohm)
B: 0.7 Vp-p (75-ohm)
R: 0.7 Vp-p (75-ohm)
HD/VD: 1.0 - 5.0 Vp-p (high impedance)
VBS (use HD port)
with picture 1.0 Vp-p (high impedance)
without picture 0.3 Vp-p (high impedance)
without picture 0.3 Vp-p (high impedance)
SERIAL
External Control Terminal
D-sub 9 Pin
D-sub 9 Pin
RS-232C compatible
3D SHUTTER OUT
*2
M3 jack x 1, for 3D active shutter eyewear
SLOT
DVI-D IN DVI-D 24 Pin
Content Protection
Audio Input is not available
Audio Input is not available
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
Compatible with HDCP 1.1
Accessories Supplied
Remote Control
Transmitter
Transmitter
N2QAYB000560 (UX1, UX1W) , N2QAYB000561 (UX1C)
Batteries
R6(AA)Size x 2
Fixing band
TMME203 x 3
Dimensions (W
× H × D)
141.8 inch x 78.0 inch x 5.8 inch
*3
/ 3,600 mm x 1,980 mm x 147 mm
*3
Mass (weight)
approx. 1,272.1 lbs / 577 kg net
*1 4 inputs is set and only for one 4k2k signal. You can not input 4 different signal to each inputs.
*2 An optional 3D IR TRANSMITTER is required for viewing 3D images.
*3 10.3 inch / 260 mm when including protruding portion of terminals
*2 An optional 3D IR TRANSMITTER is required for viewing 3D images.
*3 10.3 inch / 260 mm when including protruding portion of terminals
Note:
• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
• This equipment complies with the EMC standards listed below.
• This equipment complies with the EMC standards listed below.
EN55022, EN55024, EN61000-3-11, EN61000-3-12.
Click on the first or last page to see other TH-152UX1 / TH-152UX1W / TH-152UX1C service manuals if exist.