TH-103VX200W - Panasonic Plasma Service Manual (repair manual). Page 16

16

TH-103VX200W

1. Self-check is used to automatically check the bus line

controlled circuit of the Plasma display.

2. To get into the Self-check mode, press the   button on

the customer controls at the bottom of the set, at the
same time pressing the OFF-TIMER button on the remote
control, and the screen will show.

If the IIC ports have been checked and found to be incorrect
Or not located then [ - - ] will appear in place of [OK]
[01] in the line of the [PTCT] means the number of blinks of the
Power LED is 1. (Reference to 7.1.2)
[H09] in the line of the [PTCT] is the error code.

To exit the CAT mode switch off the main power.

The line of the [PTCT] displays when you get into the Self-
check mode for the first time only after the Power LED
blinks.