Read Panasonic TH-103PF12W / TH-103PF12T Service Manual online
22
TH-103PF12W / TH-103PF12T
8 Service Fixture & Tools
8.1.
SC jig
Purpose:
To find the failure board (SC or SU/SM/SD) when the power LED is blinking 7 times.
SC jig:
Jumper connector to connect to SC50 connector on SC board
Part number:
TZSC09187
How to use:
Caution: Remove SC jig from SC board after inspection.
1. Remove all connector between SC board and SU/SM/SD board to isolate SC board from SU/SM/SD board electrically.
Note: The board will be damaged if all connector is not removed (for example; remove connector only for SU board
and stay connecting with SM/SD board. The board will be damaged.)
2. Connect SC jig to connector SC51 at left bottom side of SC board.
3. Turn on the TV/Display Unit and confirm the power LED blinking.
3. Turn on the TV/Display Unit and confirm the power LED blinking.
LED blinking: Possible cause of failure is in SC board
No LED blinking (Lighting or no lighting): Possible cause of failure is in SU, SM or SD board
No LED blinking (Lighting or no lighting): Possible cause of failure is in SU, SM or SD board
4. After inspection, turn off the TV/Display Unit and wait a few minutes to discharge.
5. Remove SC jig from SC board.
5. Remove SC jig from SC board.
Remark: This SC jig can be used for all 2009 Plasma TV and Plasma Display.
Click on the first or last page to see other TH-103PF12W / TH-103PF12T service manuals if exist.