CF-W4HWEZZBM - Panasonic PC Service Manual (repair manual). Page 20

Read Panasonic CF-W4HWEZZBM Service Manual online

 Display
 (continued)
An afterimage appears (e.g.,
green, r ed, and  blue  dots
remain  on the display)  or
there ar e dots not display-
ing the correct colors
The  screen becomes disor-
dered
The  external  display  no
longer displays properly
During  simultaneous  dis-
play, the screen of the  exter-
nal  display becomes  disor-
dered
When  an  M PEG  file  is be-
ing  played  with Media
Player, the display  destina-
tion cannot be switched us-
ing
Fn    +   F3
Application  is not displayed
properly,  or characters
 are
garbled
If an image is displayed for a prolonged period of time, an afterimage may appear . This
is not a malfunction.  The afterimage will disappear when a different screen is displayed.
High-precision and advanced  technologies are necessary in the production of color liquid
crystal displays (color LCDs).   
Therefore, if 0.002% or less of the picture elements either
fail to light or remain constantly lit  (that is, more than 99.998% of  elements are function-
ing properly), no defect is considered to exist.
Changing  the number of  colors  or resolution  of  the display  may affect  the screen. Restart
the computer.
When  an external display not compatible with the power saving mode is used with the
computer, the display  may not function  correctly  when the computer  enters the power
saving mode.  In such cases, turn off the power to the external display .
Try changing the display by pressing     Fn    +    F3    .
If you continue to experience problems, try changing the display destination in the fol -
lowing menu:
Windows XP
[start] - [ Control Panel ] - [ Other Control Panel Options] - [ Intel (R)  
 Extreme Graphics] -
[ Devices]
The display destination cannot be switched while an MPEG file is playing.  Stop playing
the MPEG file before switching the display destination.
Is the application a non-Unicode program? 
When non-Unicode programs are run on
Windows XP, you must select the language appropriate to that program.
Set [ Language for non-Unicode programs] in [ Control Panel ] - [ Date, Ti me, Language,
and Regional Options] - [ Regional and Language Options] - [ Advanced] .
Note that only a user with the administrator authority can change this setting.
 Battery Indicator
The red indicator lights
The red indicator blinks
The orange indicator blinks
The battery level is very low (the charge is less than approx. 9% capacity).
Connect the AC adaptor . You can use the computer when the indicator light is orange. If
you do not have an AC adaptor, save your data and power of f your computer. After
replacing the battery pack with a fully charged one, turn your computer on.
Quickly save your data and power off your computer . Remove the battery pack and dis-
connect the AC adaptor , then connect them again.
If the problem persists, contact your technical support office. Possible failure in
failure  in the battery pack or charging circuit.
Battery cannot be recharged temporarily because the internal temperature of the battery
pack is outside of the acceptable temperature range for recharging. Once the allowable
range requirement  is satisfied, charging  begins automatically. Your  computer can be used
normally in this state.
W indows cannot be shut
down or restarted
 Shutting Down
If a USB device is connected, try removing it.
W hen starting  Sound Re-
corder, it displays the mes-
sage: “Ther e was an error
updating the registry.”
 Sound
Sound Recorder displays this error message when started by a user with a limited  account
if the user’s language setting  is different  to that of  the user  with  administrator  authority
which last started it .
This will not affect the operation of the computer .
20
Page of 64
Display

Click on the first or last page to see other CF-W4HWEZZBM service manuals if exist.