Read Panasonic CF-T4HWETZBM Service Manual online
6.2.6.
Removing the LCD Knob and the
Speaker
Speaker
Preparation : perform the section 6.2.1. , 6.2.2. and 6.2.4.
first.
first.
1. Remove the latch spring from the top case.
2. Remove the hook of the LCD knob from stopper rib of the
top case.
3. Peel off the tape of the speaker box.
4. Peel off the tape on the speaker and speaker ring and then
remove the speaker.
Speaker Box
Speaker
Speaker
Ring
Ring
Location of the Spring
Latch
Spring
Spring
LCD Knob
6.2.7.
Removing the USB Board
Preparation : perform the section 6.2.1. , 6.2.2. and 6.2.4.
first.
first.
1. Peel off the tape for clamp the USB cable.
2. Remove the connector (CN23) on the main board.
3. Remove the USB board from the bottom case.
CN23
Tape
2-Port USB Board
USB Cable
6.2.8.
Removing the Main Board
Preparation : perform the section 6.2.1. , 6.2.2. and 6.2.4.
first.
first.
1. Remove the 1 screw (E), 1 screw (F), 2 screws (H) and 2
screws ( I ).
Screw (E):DXQT2+E10FNL(N10)
Screw (F):DXQT2+D4FNL(N9)
Screw (H):DFHE5035ZB(N2)
Screw ( I ):KIYE50000022(N500)
Screw(E)
Screw(F)
Screw(H)
Screw(I)
2. Remove the 2 screws (N).
Screw (N):DXQT2+E6FNL(N13)
3. Remove the modem cable from the MDCmodem.
4. Remove the side cover(L) from the bottom case.
DC Jack
Holder
Holder
Side Cover(L)
Antenna Board(L)
Screw(N)
Screw(N)
Main Board
LAN Cable
Modem Cable
Tape
31
Click on the first or last page to see other CF-T4HWETZBM service manuals if exist.