KX-UDT111RU (serv.man3) - Panasonic PBX Service Manual (repair manual). Page 37

37

1. Execute “Flash Program.exe”.
2. Select “Test command” sheet.
3. Enter command in command columu.
4. Click “Send”.

See the table below for frequently used commands.

Command name

Function

Example

EPR

Read the data of EEPROM

Type “EPR 00 00 FF”, and the data from address “00 00” to “FE” is read out.

IDR

Read ID (RFPI)

Type “IDR”, and the registered ID is read out.

IDW

Write ID (RFPI)

Type “IDW 00 18 E0 0E 98”, and the ID “0018 E0 0E 98” is written.

VER

Read software version

Type “VER”.

EPW

Write the data of EEPROM

Type “EPW 01 23 01 45”. “01 23” is address, “01” is length and “45” is data to be written.

SFR

Clock adjustment value

Type "SDR xx xx". xx xx starts at 0100. Depending on the value of the frequency of test
point SKM, it changes forward and backward. It ends when it is in range of 13.824MHz ±
7Hz.

LED

LED control

Type"LED F". All of the FEF LED, the Yellow green LED the LCD Back Light and the Key
Back Light light up.
Type "LED 1". The RED LED lights up.
Type "LED 2". The Yellow green LED lights up.

VIB

VIB Motor control

Type "VIV 1". The VIB operates.