Read Panasonic KX-TE82494X Service Manual online
6
KX-TE82494X
4 Installation Instructions
4.1.
Location of Optional Cards
Note
Use extra care to make sure you do not damage the part of the case marked with a circle.
3. Close the covers and secure the screws.
3. Close the covers and secure the screws.
Function
Adds Caller ID support for 3 outside (CO) lines. 1 card can be installed for outside (CO) lines 1-3. A second card can be installed
for outside (CO) lines 4-6, and a third card can be installed for outside (CO) lines 7 and 8.
FSK and DTMF Caller ID types are supported. For information on the type of Caller ID used in your area, contact your telephone
company.
1. Loosen the screws and open the top and bottom front covers.
2. Slid the card between the guiderails until it clicks, and attach the connector to it.
for outside (CO) lines 4-6, and a third card can be installed for outside (CO) lines 7 and 8.
FSK and DTMF Caller ID types are supported. For information on the type of Caller ID used in your area, contact your telephone
company.
1. Loosen the screws and open the top and bottom front covers.
2. Slid the card between the guiderails until it clicks, and attach the connector to it.
Note
To uninstall the card, follow the instructions illustrated below.
1. Push the catch on the side of one guardrail in the direction of the arrow to release it.
2. Lift the edge of the card while holding the catch open. (Do not touch the circuit board of the card during the operation.)
2. Lift the edge of the card while holding the catch open. (Do not touch the circuit board of the card during the operation.)
Click on the first or last page to see other KX-TE82494X service manuals if exist.