Read Panasonic KX-TDE0111XJ / KX-TDE0111X (serv.man2) Service Manual Supplement online
2
KX-TDE0111XJ/KX-TDE0111X
1 CHANGES
1.1.
Subject
Since the main board of KX-TDE0111XJ/KX-TDE0111X was changed, the display on the board; PSUP1546ZA was also changed to
PSUP1546YA. Distinguish a change by this indication.
Suffix Location
1.2.
Replacement Parts List
KX-TDE0111
In the case of P.C.Board Part No.
PSUP1546ZA, use only original parts.
PSUP1546ZA, use only original parts.
In the case of P.C.Board Part No.
PSUP1546Y
PSUP1546Y
＊, use only new parts.
(
＊ indicates alphabetical character.)
Suffix
Reason for suffix change
B to C
Request from vender (PCB change PSUP1546ZA to PSUP1546YA)
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
Remarks:
1. Mark *1 have been changed at the same time. New parts can be used for only PSUP1546YA.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
Z Other
Click on the first or last page to see other KX-TDE0111XJ / KX-TDE0111X (serv.man2) service manuals if exist.