KX-TDE0101RU (serv.man2) - Panasonic PBX Service Manual (repair manual). Page 10

Read Panasonic KX-TDE0101RU (serv.man2) Service Manual online

10
KX-TDE0101RU
4.2.2.
Description of Each Part
LED Lamp (BATT ALARM): Turns on to indicate the dropping of the lithium battery voltage (less than 2.8V).
LED Lamp (SD ACCESS): Turns on when the SD card is accessing.
SD card slot: Mounts the system program SD card.
Reset Switch: Press at the system reset. 
System Initialize Switch:
On default startup, set the switch to the "SYSTEM INITIALIZE" position for the power ON. Return the switch to the "NORMAL"
position when the main power switch starts to flash. On normal startup, turn the power ON with the "NORMAL" position.
LAN connector: 1, 2. Used for the PC programming and the VoIP.
PAGING 1, 2: External PAGING output. Connect to the device with the built-in amplifier.
MOH 1, 2: External music on-hold input.
LED Lamp (LINK / ACT) Turns on: LINK OK. Blinking: ACTive data is communicated.
LED Lamp (100 / 10) Turns on: 100BASE-TX. Turns off: 10BASE-T.
Page of 103
Display

Click on the first or last page to see other KX-TDE0101RU (serv.man2) service manuals if exist.