Read Panasonic KX-TDA6181X Service Manual online
2 FOR SERVICE TECHNICIANS
ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help prevent recurring malfunctions.
1. Cover the plastic part´s boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not touch the IC or LSI pins with bare fingers.
When repairing, the following precautions will help prevent recurring malfunctions.
1. Cover the plastic part´s boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on the worktable.
4. Do not touch the IC or LSI pins with bare fingers.
3 GENERAL DESCRIPTION
This card is inserted in the free slot of the TDA600 system and is capable of connecting 16 analog loop start lines.
Up to 2 CALLER ID/PAYTONE card can be added on as option cards.
The LPR is an SH-1 (SH7020) with 512Kbyte flash ROM and 128Kbyte SRAM, and supports software version upgrade though
downloading.
Up to 2 CALLER ID/PAYTONE card can be added on as option cards.
The LPR is an SH-1 (SH7020) with 512Kbyte flash ROM and 128Kbyte SRAM, and supports software version upgrade though
downloading.
4 SPECIFICATION
Functional Block
Functional contents
Analog External Line Interface
Number of Ports
16 ports
Main Function
+30V 30mA Feeding function
Dial Pulse Signal Transmission Function
DTMF Signal Transmission Function
Inversion Detection Function
Bell Detecting Function
Ring-off Signal Detection Function
2w/4w Conversion Function
Surge Protection Function
Returning Sound Generation Function
4ch CODEC Function
Dial Pulse Signal Transmission Function
DTMF Signal Transmission Function
Inversion Detection Function
Bell Detecting Function
Ring-off Signal Detection Function
2w/4w Conversion Function
Surge Protection Function
Returning Sound Generation Function
4ch CODEC Function
•
•
•
• CODEC function
•
•
•
• Power down function
•
•
•
• µ/A Iaw switching function
•
•
•
• Test function (Loop back, Tone generation)
•
•
•
• Programmable digital filtering function
•
•
•
• Serial interface function
•
•
•
• PIO function
DTMF Generator
Transmits arbitrary tones for every 16 line port
Option Card
Can be installed two CO-CID/PT cards for eight lines
On-board DC/DC Power Supply
Input +15V
Output +15V, +5V, +3.3V
Output +15V, +5V, +3.3V
Power Failure Forwarding Function
Supports four lines
Self-diagnosis Function
Performed with the extension interface in pairs
Channel Test, Dial Pulse Test, DTMF Test
Channel Test, Dial Pulse Test, DTMF Test
ASIC#2 (eSAMSON)
EC Bus interface function
H.100 Bus interface function, Digital PLL function
Local Bus interface function
Time Switch Function, Gain Control Function
Intelligent PIO Function, JTAG
H.100 Bus interface function, Digital PLL function
Local Bus interface function
Time Switch Function, Gain Control Function
Intelligent PIO Function, JTAG
Control Unit
CPU
SH-1/SH7020 (12.288MHz)
Flash ROM
512Kbyte
SRAM
128Kbyte
LED Display Circuit
Card Status Display LED: 2-color (red/green)
External Interface Connector
External Line Interface
50pin Amphenol Connector: 1 unit
Power Failure Transfer
4pin Modular Jack: 2 units
5
KX-TDA6181X
Click on the first or last page to see other KX-TDA6181X service manuals if exist.