Read Panasonic KX-TDA1176X (serv.man2) Service Manual online
5
KX-TDA1176X
3 Specifications
4 General/Introduction
4.1.
General Description
This card is plugged into a free slot on the TDA100D systems and randomly connects up to 16 SLT devices and telephone with
waiting message function.
This card sends Caller ID signal to extension ports.
The LPR is SH-1(SH7020), and the memory is composed of a 512K byte Flash ROM and a 128K byte SRAM.
It also supports a software upgrade by downloading the latest version.
waiting message function.
This card sends Caller ID signal to extension ports.
The LPR is SH-1(SH7020), and the memory is composed of a 512K byte Flash ROM and a 128K byte SRAM.
It also supports a software upgrade by downloading the latest version.
Functional Block
Functional contents
Extension Interface
Number of Ports
16 ports
SLT Interface
-26V 26mA Feeding function
Dial-pulse signal detecting function
DTMF signal detecting function
Bell signal issuing function
Hook detecting function
Ringtrip detecting function
2W/4W converting function
Surge protective function
CODEC function
Dial-pulse signal detecting function
DTMF signal detecting function
Bell signal issuing function
Hook detecting function
Ringtrip detecting function
2W/4W converting function
Surge protective function
CODEC function
• Test function (Loop back, Tone generation)
• Programmable digital filtering function
• Serial interface function
• PIO function
• Programmable digital filtering function
• Serial interface function
• PIO function
DTMF Receiver
16 lines for each port
Caller ID (FSK)
16 lines for each port
On-board Ringer
20/25Hz 65Vrms
Phase control (Three-phase / Four-phase)
Phase control (Three-phase / Four-phase)
On-board DC/DC Power Supply
Input +15V
Output +3.3V
Input +40V
Output: -30V, +80V
Output +3.3V
Input +40V
Output: -30V, +80V
Power Failure Forwarding Function
2 lines supported
ASIC
EC bus interface function
H.100 bus interface function, Digital PLL function
Local bus interface function
Time switch function, Gain controlling function, FIFO/DPRAM function
Intelligent PIO function
H.100 bus interface function, Digital PLL function
Local bus interface function
Time switch function, Gain controlling function, FIFO/DPRAM function
Intelligent PIO function
Control Unit
CPU
SH-1/SH7020 (12.288MHz)
Flash ROM
512Kbyte
SRAM
128Kbyte
FPGA
• Interface between codec and CPU
• SRAM type (XC3S250E) manufactured by XILINX
• CID128 bytes /ch transmission buffer
• SRAM type (XC3S250E) manufactured by XILINX
• CID128 bytes /ch transmission buffer
LED Display Circuit
Card status indicating LED: Two colors (Red/Green)
External Interface Connector
Extension interface
50pin Amphenol connector: 1
Power failure forwarding 4pin modular jack: 1
Click on the first or last page to see other KX-TDA1176X (serv.man2) service manuals if exist.