Read Panasonic KX-TDA100DRP (serv.man7) Service Manual Supplement online
ORDER NO. KMS1702422SE
Hybrid IP-PBX
Model No.
KX-TDA100DRP
(for Russia)
TABLE OF CONTENTS
PAGE
1 CHANGES----------------------------------------------------------- 2
1.1. Subject ------------------------------------------------------ 2
1.2. Replacement Parts List ---------------------------------- 2
1.2. Replacement Parts List ---------------------------------- 2
Supplement-5
Please file and use this supplement manual together with the service manual for Model No. KX-
TDA100DRP, Order No. KMS1105823CE.
TDA100DRP, Order No. KMS1105823CE.
2
KX-TDA100DRP
1 CHANGES
1.1.
Subject
SUFFIX LOCATION
1.2.
Replacement Parts List
NM
KXTDA100DRP
Suffix
Reason for suffix change
K to L
Change FETs in DC/DC converter at SLIC.
L to M
Change the Thyristor.
Suffix K - M
1HAQM123456
Serial No.
Label
(Example)
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
Remarks:
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change
(Suffix)
Original (Old)
New
DMPR CARD Parts
E7
E7
PSHE1122Y
PNME1083Z
SPACER
2
8
V
---
Main Board Parts (8-Port Analog Trunk Card with CID (CLCOT8))
C1A-C1H
C1A-C1H
PSCU2JW221KR
F1K3A221A009
CAPACITOR, 220pF
8
8
V
---
Main Board Parts (24-Port Single Line Telephone Extension with Caller ID and Message Lamp Card (MCSLC24))
IC602
IC602
PNWI2A1176X4
PNWI2A1176X5
IC
1
1
W
---
Q301A-Q301X B1CFMM000002
B1CFMM000004
TRANSISTOR(SI)
24
8
W
M
D304A-D304X B2ZBZ0000042
B2ZBZ0000045
DIODE(SI)
24
8
W
M
D305A-D305X B2ZBZ0000042
B2ZBZ0000045
DIODE(SI)
24
8
W
M
J8
----------
ERJ2GE0R00
RESISTOR,0Ω
1
8
Y
M
J9
ERJ2GE0R00
----------
RESISTOR,0Ω
0
8
Y
M
Display
