KX-TDA0158CE - Panasonic PBX Service Manual (repair manual). Page 11

11

Refer to the following example to connect a CS to the Hybrid IP-PBX.

• The no. 4 and no. 5 pins (Master) of the CS must be connected to a pair of pins on the DHLC/DLC card. Then use 4 consecutive

pairs of pins on the DHLC/DLC card, starting with the pins corresponding to the Master, as in the example above. 

• When connecting multiple KX-TDA0158CE CSs to a DHLC/DLC card, make sure that the no. 4 and no. 5 pins (Master) of adja-

cent CSs are at least 3 pairs of pins away on the card. 

• CS connections must be made within the same DHLC/DLC card. 
• When a wrong connection is made, satisfactory performance of the CS cannot be guaranteed. 

Check the connection of CS and the PBX using the KX-TDE Maintenance Console. For information about how to view CS infor-
mation using the KX-TDE Maintenance Console, refer to the On-line Help.