Read Panasonic KX-T7730UA (serv.man2) Service Manual Supplement online
2
KX-T7730UA
1 CHANGES
1.1.
Subject
SUFFIX LOCATION
1.2.
Replacement Parts List
Suffix
Reason for suffix change
G to H
Add PCB-unit for noise rejection.
H to I
Change SP-phone IC.
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
Remarks:
*1: Improved-new SP-phone IC3 will be delivered as permanent countermeasure.
*1: Improved-new SP-phone IC3 will be delivered as permanent countermeasure.
Then Small sub-PCB unit is deleted on main PCB.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change
(Suffix)
Original (Old)
New
MAIN BOARD PARTS
IC3
IC3
C1CB00001673
C1CB00004219
IC
1
*1
8
V
I
R61 ERJ3GEY0R00
----------
RESISTOR, 0
0
6
-
H
R61
----------
ERJ3GEY0R00V
RESISTOR, 0
1
8
-
I
Click on the first or last page to see other KX-T7730UA (serv.man2) service manuals if exist.