Read Panasonic KX-NT511PRUW / KX-NT511PRUB (serv.man2) Service Manual Supplement online
KX-NT511PRUW/KX-NT511PRUB
17
1.4. DISASSEMBLY AND ASSEMBLY INSTRUCTIONS
1.4.1. Assembly for Lead Wire
Changed from the Original Service Manual Section 10.3.
Perform this process in reverse when taking the unit apart.
CLAMP
CLAMP
CLAMP
CLAMP
•Pass DC lead through the top of the PoE PCB.
•DC lead and MIC lead should not touch.
Push extra wire of DC lead with finger.
MIC lead
DC lead and the other leads
should not contact.
Never protrude WIREs from
the yellow line (the rib).
the yellow line (the rib).
DC lead should be
no slack.
Taping area:
Never place tape on white area.
The tape should not touch silk.
Click on the first or last page to see other KX-NT511PRUW / KX-NT511PRUB (serv.man2) service manuals if exist.