KX-NS0131X - Panasonic PBX Service Manual (repair manual). Page 10

10

A stacking card to be installed in the MPR card slot of a KX-NCP500 or KX-NCP1000 to be used as a legacy gateway.
This card can be used only with PCMPR Software Version 002.01000 or later.

Accessories (included): Stacking cable x 1
User-supplied (not included): None

A lithium battery is used in the STACK-S (NCP) card. There is a risk of explosion if the battery is replaced with an incorrect type.
Dispose of used batteries according to the manufacturer’s instructions.

When installing or removing this card, the power switch must be turned off.

When stacking other PBXs with the KX-NS1000, place them well within reach of the stacking cable (2 m).

STACK-S (NCP) Card

Indication

Colour

Description

CARD STATUS Green

STACK-S (NCP) card status indication

• ON: INS (In Service)

Red

STACK-S (NCP) card status indication

• ON: Fault
• Flashing: OUS (Out of Service)

Indication

Colour

Description

RUN

Green

Status indication for legacy gateway

• ON:  Normal
• OFF:  Power  off
• Slow Flashing: Starting up
• Moderate Flashing: STACK-S (NCP) card error

LED flashing patterns are as follows:

• Slow Flashing: 60 times per minute
• Moderate Flashing: 120 times per minute

ALARM

Red

Alarm status indication for legacy gatewa

• ON:  Alarm
• OFF:  Normal