KX-NCP1290CJ (serv.man3) - Panasonic PBX Service Manual Supplement (repair manual)

Model
KX-NCP1290CJ (serv.man3)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
125.31 KB
Type
PDF
Document
Service Manual Supplement
Brand
Device
PBX / PRI30 CARD
File
kx-ncp1290cj-sm3.pdf
Date

View Panasonic KX-NCP1290CJ (serv.man3) Service Manual Supplement online

ORDER NO. KMS1506119SE
PRI30 Card
Model No.
KX-NCP1290CJ
(for Asia, Oceania, Middle Near Esat, Africa and 
Latin America)
TABLE OF CONTENTS
PAGE
1 CHANGES----------------------------------------------------------- 2
1.1. Replacement Parts List ---------------------------------- 2
Supplement-4
Please file and use this supplement manual together with the service manual for Model No. KX-
NCP1290CJ Order No. KMS0810582CE.
2
KX-NCP1290CJ
1 CHANGES
1.1.
Replacement Parts List
NM
KXNCP1290CJ
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
*1 have been changed at the same time.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Main Board Parts
D2-D4
LNJ210C6RRA
B3AAB0000525
DIODE(SI) 3
*1
8
Y
---
D5, D6
LNJ310M6URA
B3ABB0000518
DIODE(SI) 2
*1
8
Y
---
D502
B0JCND000009
B0JCND000013
DIODE(SI)
1
8
V
---
CN4
K2LC1YYB0026
K2LC1YYB0072
JACK, MODULAR
1
8
V
---
R43, R44, R46 ERJ3GEYJ151
ERJ3GEYJ272
RESISTOR, 2.7 k
3
*1
8
Y
---
R47, R48
ERJ3GEYJ151
ERJ3GEYJ102
RESISTOR,1 k
2
*1
8
Y
---
2
KX-NCP1290CJ
1 CHANGES
1.1.
Replacement Parts List
NM
KXNCP1290CJ
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
*1 have been changed at the same time.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Main Board Parts
D2-D4
LNJ210C6RRA
B3AAB0000525
DIODE(SI) 3
*1
8
Y
---
D5, D6
LNJ310M6URA
B3ABB0000518
DIODE(SI) 2
*1
8
Y
---
D502
B0JCND000009
B0JCND000013
DIODE(SI)
1
8
V
---
CN4
K2LC1YYB0026
K2LC1YYB0072
JACK, MODULAR
1
8
V
---
R43, R44, R46 ERJ3GEYJ151
ERJ3GEYJ272
RESISTOR, 2.7 k
3
*1
8
Y
---
R47, R48
ERJ3GEYJ151
ERJ3GEYJ102
RESISTOR,1 k
2
*1
8
Y
---
2
KX-NCP1290CJ
1 CHANGES
1.1.
Replacement Parts List
NM
KXNCP1290CJ
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
*1 have been changed at the same time.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Main Board Parts
D2-D4
LNJ210C6RRA
B3AAB0000525
DIODE(SI) 3
*1
8
Y
---
D5, D6
LNJ310M6URA
B3ABB0000518
DIODE(SI) 2
*1
8
Y
---
D502
B0JCND000009
B0JCND000013
DIODE(SI)
1
8
V
---
CN4
K2LC1YYB0026
K2LC1YYB0072
JACK, MODULAR
1
8
V
---
R43, R44, R46 ERJ3GEYJ151
ERJ3GEYJ272
RESISTOR, 2.7 k
3
*1
8
Y
---
R47, R48
ERJ3GEYJ151
ERJ3GEYJ102
RESISTOR,1 k
2
*1
8
Y
---
2
KX-NCP1290CJ
1 CHANGES
1.1.
Replacement Parts List
NM
KXNCP1290CJ
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
*1 have been changed at the same time.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Main Board Parts
D2-D4
LNJ210C6RRA
B3AAB0000525
DIODE(SI) 3
*1
8
Y
---
D5, D6
LNJ310M6URA
B3ABB0000518
DIODE(SI) 2
*1
8
Y
---
D502
B0JCND000009
B0JCND000013
DIODE(SI)
1
8
V
---
CN4
K2LC1YYB0026
K2LC1YYB0072
JACK, MODULAR
1
8
V
---
R43, R44, R46 ERJ3GEYJ151
ERJ3GEYJ272
RESISTOR, 2.7 k
3
*1
8
Y
---
R47, R48
ERJ3GEYJ151
ERJ3GEYJ102
RESISTOR,1 k
2
*1
8
Y
---
2
KX-NCP1290CJ
1 CHANGES
1.1.
Replacement Parts List
NM
KXNCP1290CJ
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
*1 have been changed at the same time.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Main Board Parts
D2-D4
LNJ210C6RRA
B3AAB0000525
DIODE(SI) 3
*1
8
Y
---
D5, D6
LNJ310M6URA
B3ABB0000518
DIODE(SI) 2
*1
8
Y
---
D502
B0JCND000009
B0JCND000013
DIODE(SI)
1
8
V
---
CN4
K2LC1YYB0026
K2LC1YYB0072
JACK, MODULAR
1
8
V
---
R43, R44, R46 ERJ3GEYJ151
ERJ3GEYJ272
RESISTOR, 2.7 k
3
*1
8
Y
---
R47, R48
ERJ3GEYJ151
ERJ3GEYJ102
RESISTOR,1 k
2
*1
8
Y
---
2
KX-NCP1290CJ
1 CHANGES
1.1.
Replacement Parts List
NM
KXNCP1290CJ
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
*1 have been changed at the same time.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Main Board Parts
D2-D4
LNJ210C6RRA
B3AAB0000525
DIODE(SI) 3
*1
8
Y
---
D5, D6
LNJ310M6URA
B3ABB0000518
DIODE(SI) 2
*1
8
Y
---
D502
B0JCND000009
B0JCND000013
DIODE(SI)
1
8
V
---
CN4
K2LC1YYB0026
K2LC1YYB0072
JACK, MODULAR
1
8
V
---
R43, R44, R46 ERJ3GEYJ151
ERJ3GEYJ272
RESISTOR, 2.7 k
3
*1
8
Y
---
R47, R48
ERJ3GEYJ151
ERJ3GEYJ102
RESISTOR,1 k
2
*1
8
Y
---
2
KX-NCP1290CJ
1 CHANGES
1.1.
Replacement Parts List
NM
KXNCP1290CJ
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
*1 have been changed at the same time.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Main Board Parts
D2-D4
LNJ210C6RRA
B3AAB0000525
DIODE(SI) 3
*1
8
Y
---
D5, D6
LNJ310M6URA
B3ABB0000518
DIODE(SI) 2
*1
8
Y
---
D502
B0JCND000009
B0JCND000013
DIODE(SI)
1
8
V
---
CN4
K2LC1YYB0026
K2LC1YYB0072
JACK, MODULAR
1
8
V
---
R43, R44, R46 ERJ3GEYJ151
ERJ3GEYJ272
RESISTOR, 2.7 k
3
*1
8
Y
---
R47, R48
ERJ3GEYJ151
ERJ3GEYJ102
RESISTOR,1 k
2
*1
8
Y
---
2
KX-NCP1290CJ
1 CHANGES
1.1.
Replacement Parts List
NM
KXNCP1290CJ
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
*1 have been changed at the same time.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Main Board Parts
D2-D4
LNJ210C6RRA
B3AAB0000525
DIODE(SI) 3
*1
8
Y
---
D5, D6
LNJ310M6URA
B3ABB0000518
DIODE(SI) 2
*1
8
Y
---
D502
B0JCND000009
B0JCND000013
DIODE(SI)
1
8
V
---
CN4
K2LC1YYB0026
K2LC1YYB0072
JACK, MODULAR
1
8
V
---
R43, R44, R46 ERJ3GEYJ151
ERJ3GEYJ272
RESISTOR, 2.7 k
3
*1
8
Y
---
R47, R48
ERJ3GEYJ151
ERJ3GEYJ102
RESISTOR,1 k
2
*1
8
Y
---
2
KX-NCP1290CJ
1 CHANGES
1.1.
Replacement Parts List
NM
KXNCP1290CJ
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
*1 have been changed at the same time.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Main Board Parts
D2-D4
LNJ210C6RRA
B3AAB0000525
DIODE(SI) 3
*1
8
Y
---
D5, D6
LNJ310M6URA
B3ABB0000518
DIODE(SI) 2
*1
8
Y
---
D502
B0JCND000009
B0JCND000013
DIODE(SI)
1
8
V
---
CN4
K2LC1YYB0026
K2LC1YYB0072
JACK, MODULAR
1
8
V
---
R43, R44, R46 ERJ3GEYJ151
ERJ3GEYJ272
RESISTOR, 2.7 k
3
*1
8
Y
---
R47, R48
ERJ3GEYJ151
ERJ3GEYJ102
RESISTOR,1 k
2
*1
8
Y
---

Download Panasonic KX-NCP1290CJ (serv.man3) Service Manual Supplement

Here you can view online and download Panasonic KX-NCP1290CJ (serv.man3) Service Manual Supplement in PDF. KX-NCP1290CJ (serv.man3) service manual supplement will guide through the process and help you recover, restore, fix, disassemble and repair Panasonic KX-NCP1290CJ (serv.man3) PBX. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.