KX-NCP1280XJ (serv.man2) - Panasonic PBX Service Manual Supplement (repair manual)

Model
KX-NCP1280XJ (serv.man2)
Pages
2 Few pages! See other manuals at the bottom of the first or last page.
Size
131.87 KB
Type
PDF
Document
Service Manual Supplement
Brand
Device
PBX / 2-PORT BRI CARD
File
kx-ncp1280xj-sm2.pdf
Date

View Panasonic KX-NCP1280XJ (serv.man2) Service Manual Supplement online

ORDER NO. KMS1403922SE
2-Port BRI Card
Model No.
KX-NCP1280XJ
(for Asia, Oceania, Middle Near Esat, Africa and 
Latin America)
TABLE OF CONTENTS
PAGE
1 CHANGES----------------------------------------------------------- 2
1.1. Subject ------------------------------------------------------ 2
1.2. Replacement Parts List ---------------------------------- 2
Supplement-1
Please file and use this supplement manual together with the service manual for Model No. KX-
NCP1280XJ Order No. KMS0810583CE.
2
KX-NCP1280XJ
1 CHANGES
1.1.
Subject 
SUFFIX LOCATION
1.2.
Replacement Parts List
JS
KXNCP1280XJ
Suffix
Reason for suffix change
B to C
Change of Connector
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Cabinet and Electrical Parts Location
5
PSQT2646Z
----------
LABEL, NO HOT SWAP
0
1
-
C
Accessories and Packing Materials
A2
PSQW2780Z
----------
LEAFLET, NO HOT SWAP
0
1
-
C
P4
----------
PSZKP1280XJV
GIFT BOX(Made in Vietnum)
1
5
-
Main Board Parts
CN1
K1KY96B00002
K1KY96B00004
CONNECTOR, 96P
1
1
W
C
2
KX-NCP1280XJ
1 CHANGES
1.1.
Subject 
SUFFIX LOCATION
1.2.
Replacement Parts List
JS
KXNCP1280XJ
Suffix
Reason for suffix change
B to C
Change of Connector
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Cabinet and Electrical Parts Location
5
PSQT2646Z
----------
LABEL, NO HOT SWAP
0
1
-
C
Accessories and Packing Materials
A2
PSQW2780Z
----------
LEAFLET, NO HOT SWAP
0
1
-
C
P4
----------
PSZKP1280XJV
GIFT BOX(Made in Vietnum)
1
5
-
Main Board Parts
CN1
K1KY96B00002
K1KY96B00004
CONNECTOR, 96P
1
1
W
C
2
KX-NCP1280XJ
1 CHANGES
1.1.
Subject 
SUFFIX LOCATION
1.2.
Replacement Parts List
JS
KXNCP1280XJ
Suffix
Reason for suffix change
B to C
Change of Connector
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Cabinet and Electrical Parts Location
5
PSQT2646Z
----------
LABEL, NO HOT SWAP
0
1
-
C
Accessories and Packing Materials
A2
PSQW2780Z
----------
LEAFLET, NO HOT SWAP
0
1
-
C
P4
----------
PSZKP1280XJV
GIFT BOX(Made in Vietnum)
1
5
-
Main Board Parts
CN1
K1KY96B00002
K1KY96B00004
CONNECTOR, 96P
1
1
W
C
2
KX-NCP1280XJ
1 CHANGES
1.1.
Subject 
SUFFIX LOCATION
1.2.
Replacement Parts List
JS
KXNCP1280XJ
Suffix
Reason for suffix change
B to C
Change of Connector
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Cabinet and Electrical Parts Location
5
PSQT2646Z
----------
LABEL, NO HOT SWAP
0
1
-
C
Accessories and Packing Materials
A2
PSQW2780Z
----------
LEAFLET, NO HOT SWAP
0
1
-
C
P4
----------
PSZKP1280XJV
GIFT BOX(Made in Vietnum)
1
5
-
Main Board Parts
CN1
K1KY96B00002
K1KY96B00004
CONNECTOR, 96P
1
1
W
C
2
KX-NCP1280XJ
1 CHANGES
1.1.
Subject 
SUFFIX LOCATION
1.2.
Replacement Parts List
JS
KXNCP1280XJ
Suffix
Reason for suffix change
B to C
Change of Connector
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Cabinet and Electrical Parts Location
5
PSQT2646Z
----------
LABEL, NO HOT SWAP
0
1
-
C
Accessories and Packing Materials
A2
PSQW2780Z
----------
LEAFLET, NO HOT SWAP
0
1
-
C
P4
----------
PSZKP1280XJV
GIFT BOX(Made in Vietnum)
1
5
-
Main Board Parts
CN1
K1KY96B00002
K1KY96B00004
CONNECTOR, 96P
1
1
W
C
2
KX-NCP1280XJ
1 CHANGES
1.1.
Subject 
SUFFIX LOCATION
1.2.
Replacement Parts List
JS
KXNCP1280XJ
Suffix
Reason for suffix change
B to C
Change of Connector
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Cabinet and Electrical Parts Location
5
PSQT2646Z
----------
LABEL, NO HOT SWAP
0
1
-
C
Accessories and Packing Materials
A2
PSQW2780Z
----------
LEAFLET, NO HOT SWAP
0
1
-
C
P4
----------
PSZKP1280XJV
GIFT BOX(Made in Vietnum)
1
5
-
Main Board Parts
CN1
K1KY96B00002
K1KY96B00004
CONNECTOR, 96P
1
1
W
C
2
KX-NCP1280XJ
1 CHANGES
1.1.
Subject 
SUFFIX LOCATION
1.2.
Replacement Parts List
JS
KXNCP1280XJ
Suffix
Reason for suffix change
B to C
Change of Connector
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Cabinet and Electrical Parts Location
5
PSQT2646Z
----------
LABEL, NO HOT SWAP
0
1
-
C
Accessories and Packing Materials
A2
PSQW2780Z
----------
LEAFLET, NO HOT SWAP
0
1
-
C
P4
----------
PSZKP1280XJV
GIFT BOX(Made in Vietnum)
1
5
-
Main Board Parts
CN1
K1KY96B00002
K1KY96B00004
CONNECTOR, 96P
1
1
W
C
2
KX-NCP1280XJ
1 CHANGES
1.1.
Subject 
SUFFIX LOCATION
1.2.
Replacement Parts List
JS
KXNCP1280XJ
Suffix
Reason for suffix change
B to C
Change of Connector
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Cabinet and Electrical Parts Location
5
PSQT2646Z
----------
LABEL, NO HOT SWAP
0
1
-
C
Accessories and Packing Materials
A2
PSQW2780Z
----------
LEAFLET, NO HOT SWAP
0
1
-
C
P4
----------
PSZKP1280XJV
GIFT BOX(Made in Vietnum)
1
5
-
Main Board Parts
CN1
K1KY96B00002
K1KY96B00004
CONNECTOR, 96P
1
1
W
C
2
KX-NCP1280XJ
1 CHANGES
1.1.
Subject 
SUFFIX LOCATION
1.2.
Replacement Parts List
JS
KXNCP1280XJ
Suffix
Reason for suffix change
B to C
Change of Connector
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON 
LISTS.
1. Improve performance
Remarks:
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code (Symbols: B) Following V-Z interchange abilities are indicated on the Notes in the bottom column.
Parts
Set Production
V Original
New
Early (before change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
W Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
X Original
New
Early (before change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Y Original
New
Early (before change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
Z Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change 
(Suffix)
Original (Old)
New 
Cabinet and Electrical Parts Location
5
PSQT2646Z
----------
LABEL, NO HOT SWAP
0
1
-
C
Accessories and Packing Materials
A2
PSQW2780Z
----------
LEAFLET, NO HOT SWAP
0
1
-
C
P4
----------
PSZKP1280XJV
GIFT BOX(Made in Vietnum)
1
5
-
Main Board Parts
CN1
K1KY96B00002
K1KY96B00004
CONNECTOR, 96P
1
1
W
C

Download Panasonic KX-NCP1280XJ (serv.man2) Service Manual Supplement

Here you can view online and download Panasonic KX-NCP1280XJ (serv.man2) Service Manual Supplement in PDF. KX-NCP1280XJ (serv.man2) service manual supplement will guide through the process and help you recover, restore, fix, disassemble and repair Panasonic KX-NCP1280XJ (serv.man2) PBX. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.