KX-HDV230RU - Panasonic PBX Service Manual (repair manual). Page 21

21

1. Connect LAN port on Customer's unit (for reference) to LAN port on Reference unit (for test) with Ethernet (LAN) cable.

2. Plug the each unit's (for test and reference) AC adaptor or PoE HUB.

1. Pick up handset (OFF Hook), then dial the following number (for test).

[0] [1] [2] [3]

2. Answer the call by pressing [SP-PHONE] button on unit (for reference), and confirm the voice and the display.
3. Disconnect the call by unit (for reference).
4. Pick up handset (OFF Hook), then dial the following number (for reference). 

[0] [4] [5] [6]

5. Answer the call by pressing [SP-PHONE] button on unit (for test), and confirm the voice and display.
6. Disconnect the call by unit (for test).

After Communication Test, set the normal mode or Factory Setting (P.24).

Ethernet (LAN) cable

Customer's Unit
Tel no: 0456

Reference Unit
Tel no: 0123

IP: 192.168.0.241
TEST mode 1

IP: 192.168.0.240
TEST mode 2

DSS cable

PoE HUB

Optional AC adaptor

Optional EHS headset
Optional headset