Read Panasonic KX-HDV20RU Service Manual online
11
KX-HDV20 Series
6 Installation Instructions
6.1.
Connections
Connect the Ethernet cable, the Handset Cord and the AC adaptor (Option) to the unit.
*2
*3
*5
*4
*1
*1 DSS cable
Connect the DSS cable as shown in the illustration.
*2 PoE HUB
*3 Optional AC adaptor
*4 Optional EHS headset
*3 Optional AC adaptor
*4 Optional EHS headset
For up-to-date information about EHS headsets that have been tested with this unit.
*5 Optional headset
For up-to-date information about headsets that have been tested with this unit.
The initial setting for the IP address is "DHCP—Auto". For information about your network environment,
contact your administrator.
contact your administrator.
When selecting Ethernet cables (not included)
Use flexible cables without jack covers. Do not use cables with a hard coating that may tear or crack when bent.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
Connect the cables as shown in the following illustration.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
Connect the cables as shown in the following illustration.
*1
*1 60 mm (2 3/8 in) or less
Use a straight CAT 5e (or higher) Ethernet cable (not included) that is 6.5 mm (1/4 in) in diameter or less.
Use a straight CAT 5e (or higher) Ethernet cable (not included) that is 6.5 mm (1/4 in) in diameter or less.
When connecting to a switching hub
If PoE is available, an AC adaptor is not needed.
This unit complies with the PoE Class 2 standard.
This unit complies with the PoE Class 2 standard.
When connecting a PC
The PC port does not support PoE for connected devices.
When connecting cables and the AC adaptor
Pass the Ethernet cable and the AC adaptor cord under the stand.
Click on the first or last page to see other KX-HDV20RU service manuals if exist.