Read Panasonic KX-HDV100RU / KX-HDV100RUB Service Manual online
14
KX-HDV100RU/KX-HDV100RUB
7 Test Mode
7.1.
Peer to Peer Test Mode
This is for VoIP communication TEST.
Setting of Unit are required before communication test by Peer to Peer Mode.
Refer to from 7.1.1 Preparation (P.14) to 7.1.2 Connection for Test (P.15) .
Refer to from 7.1.1 Preparation (P.14) to 7.1.2 Connection for Test (P.15) .
7.1.1.
Preparation
Prepared device:
• Unit (for Test phone and Reference phone): Each one
• Ethernet (LAN) cable
• Ethernet (LAN) cable
Set up unit in test mode by key control
1. Push [2][6][*] and connect power plug (AC adaptor).
2. Wait until LCD displays [p2p mode]. Then release the three keys.
3. Then the LCD displays [P2P Mode]. Press OK.
4. Then it enters P2P Mode Setting. Choose the any mode.
2. Wait until LCD displays [p2p mode]. Then release the three keys.
3. Then the LCD displays [P2P Mode]. Press OK.
4. Then it enters P2P Mode Setting. Choose the any mode.
Normal /Test1 (192.168.0.241)/Test2 (192.168.0.240)
5. Then the LCD displays [Set OK]. Remove and reconnect the plug.
Ethernet (LAN) cable
Customer's Unit
Reference Unit
Click on the first or last page to see other KX-HDV100RU / KX-HDV100RUB service manuals if exist.