Read Panasonic UE-608030 / UE-608031 / UE-608032 Service Manual online
13
3. Pull up the pipe part of the stand by hand while tightening bolts
B and C in this order.
B and C in this order.
Note:
Take hold of the pipe part of the stand and, with the
up/down unit pulled up, tighten the bolts.
Take hold of the pipe part of the stand and, with the
up/down unit pulled up, tighten the bolts.
4. Tighten up bolts A, B and C securely.
5. After attaching the left and right stands, place the assembled
parts upright, and check that there is no play either at the front
or back or at the left or right.
parts upright, and check that there is no play either at the front
or back or at the left or right.
• If there is any play in the stand after the assembled parts have
been placed upright, slightly loosen the three bolts each at the
left and right, adjust so that the play in the stand is eliminated,
and then tighten up the bolts again.
6. Secure the table plate between the left and right stands.
• Tip the table as you insert it between both sides of the stand.
Align the table with the position of the bolt holes, and then
tighten the bolts
Align the table with the position of the bolt holes, and then
tighten the bolts
Note:
Securely tighten the bolts (8) for securing the left and right
stands using a force of 5.2 N•m±0.5 N•m (53 kgf•cm ±
5 kgf•cm).
Securely tighten the bolts (8) for securing the left and right
stands using a force of 5.2 N•m±0.5 N•m (53 kgf•cm ±
5 kgf•cm).
Click on the first or last page to see other UE-608030 / UE-608031 / UE-608032 service manuals if exist.