KV-SS905C - Panasonic Other Service Manuals Service Manual (repair manual). Page 8

Read Panasonic KV-SS905C Service Manual online

4.3. Installing the Exit Stopper
(1) Position the Exit Stopper against the Document Width
Scale. (Secure the guides in place.)
   ··  
Use the Exit Stopper when needed.
4.4. Installing the Exit Tray Stopper
(1) Squeeze the ends of the Exit Tray Stopper metal guides
slightly together, and insert them into the Stopper Slots of
the Exit Tray. Then pull up the plastic part of Exit Tray
Stopper. (Install the Exit Tray Stopper in the sequence of
(1) through (3).)
4.5. DIMM Module Extension
A maximum of 256MB extended memory may be required depending on the combination of the paper size, resolution and gray
scale mode.To determine how much extended memory is required, refer to the section 4.6 “Additional Memory Size each
scanning mode (MB)
”.
* Recommended DIMM
   ··  
JEDEC-standard 168pin, dual in-line memory module (DIMM)
   ··  
Non buffered
   ··  
Single +3.3V±0.3V power supply
   ··  
Frequency/CAS Latency : 100MHz/CL=2, 133MHz/CL=2, 133MHz/CL=3
   ··  
64MB, 128MB or 256MB may be used.
(Reference) DIMM module which has been evaluated using this scanner
   ··  
Manufacturer: DELKIN DEVICES
 1. Model No.: DM168-064Y3Q488-10S2P (64MB)
 2. Model No.: DM168-064Y3Q446-10D2P (64MB)
 3. Model No.: DM168-128Y3Q448-10D4P (128MB)
Note
Originally, I/F Board (SCSI Board) has 64MB memory as the standard memory.
8
KV-SS905C
Page of 127
Display

Click on the first or last page to see other KV-SS905C service manuals if exist.