Read Panasonic KV-S8147-M / KV-S8127-M / KV-S8150 / KV-S8130 / KV-S8120 Service Manual Supplement online
2
KV-S8147/KV-S8127/KV-S8150/KV-S8130/KV-S8120
1 CHANGES
1.1.
Subject
KV-S8147-M/KV-S8127-M
KV-S8150-CN/KV-S8130-CN/KV-S8120-CN
KV-S8147-J/KV-S8127-J
SUFFIX LOCATION
1.2.
Replacement Parts List
Suffix
Reason for suffix change
A to B
Add a EAC mark on Name Plate and POS Label.
B to C
Add the Korean NAME/PLATE and carton label.
C to D
Firmware version up. (Firmware:1.03->1.06)
D to E
Firmware version up. (Firmware:1.06->1.07)
E to F
Change and Firmware(1.07→1.08) for increase the paper feeding stability.
F to G
Firmware version up. (Firmware:1.08->1.09)
Suffix
Reason for suffix change
A to B
Firmware version up. (Firmware:1.03->1.06)
B to C
Firmware version up. (Firmware:1.06->1.07)
C to D
Change and Firmware(1.07→1.08) for increase the paper feeding stability.
D to E
Firmware version up. (Firmware:1.08->1.09)
Suffix
Reason for suffix change
A to B
Change and Firmware(1.07→1.08) for increase the paper feeding stability.
B to C
Firmware version up. (Firmware:1.08->1.09)
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
Remarks.
*1:Change the color of document guide lock from black to gray. *2:Refer figure.1.*3:Refer figure.2.
*4:Change the material color of the three gears from white to black.
*5:Refer figure.3. have been changed at the same time.
*6:have been changed at the same time.
*7:Refer figure.4. Need to delete temporary sheet.
*8:Refer figure.5. *9:Refer figure.6. *10:Refer figure.7.
*11:Refer figure.8.*12: Refer figure.9.
*1:Change the color of document guide lock from black to gray. *2:Refer figure.1.*3:Refer figure.2.
*4:Change the material color of the three gears from white to black.
*5:Refer figure.3. have been changed at the same time.
*6:have been changed at the same time.
*7:Refer figure.4. Need to delete temporary sheet.
*8:Refer figure.5. *9:Refer figure.6. *10:Refer figure.7.
*11:Refer figure.8.*12: Refer figure.9.
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code
Parts
Set Production
A Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
B Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
C Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
D Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
E
Addition
F
Deletion
G
Other
Click on the first or last page to see other KV-S8147-M / KV-S8127-M / KV-S8150 / KV-S8130 / KV-S8120 service manuals if exist.