Read Panasonic KV-S8147 / KV-S8127 / KV-S8150 / KV-S8130 / KV-S8120 (serv.man3) Service Manual Supplement online
2
KV-S8147/KV-S8127/KV-S8150/KV-S8130/KV-S8120
1 CHANGES
1.1.
Subject
KV-S8147-M/KV-S8127-M
KV-S8150-CN/KV-S8130-CN/KV-S8120-CN
KV-S8147-J/KV-S8127-J
SUFFIX LOCATION
1.2.
Replacement Parts List
Suffix
Reason for suffix change
G to H
Firmware version up.(Ver.1.09->Ver.1.10)
H to I
Firmware version up.(Ver.1.10->Ver.1.11),Improve performance of dust proof and thin paper feeding.
Suffix
Reason for suffix change
E to F
Firmware version up.(Ver.1.09->Ver.1.10)
F to G
Firmware version up.(Ver.1.10->Ver.1.11),Improve performance of dust proof and thin paper feeding.
Suffix
Reason for suffix change
C to D
Firmware version up.(Ver.1.09->Ver.1.10)
D to E
Firmware version up.(Ver.1.10->Ver.1.11),Improve performance of dust proof and thin paper feeding.
Reason for Change
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
*The following items (1-8) indicate the reason for change. See the “Notes” column for each part in ORIGINAL AND NEW PARTS COMPARISON
LISTS.
1. Improve performance
Remarks.
*1:Need to change with Free Roller 1/2 Plate.
*2:Need to change with Back Side Plate.
*3:This part is unnecessary when replacing with Ref.No.505 and 513.
*4:When you change these parts, please change at the same time.
*5:Need to change with DFP Shaft Plate Assy.
*6: Refer figure.1
*7: Refer figure.2
*8: Refer figure.3
*1:Need to change with Free Roller 1/2 Plate.
*2:Need to change with Back Side Plate.
*3:This part is unnecessary when replacing with Ref.No.505 and 513.
*4:When you change these parts, please change at the same time.
*5:Need to change with DFP Shaft Plate Assy.
*6: Refer figure.1
*7: Refer figure.2
*8: Refer figure.3
2. Change of material or dimension
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
3. To meet approved specification
4. Standardization
5. Addition
6. Deletion
7. Correction
8. Other
Interchangeability Code
Parts
Set Production
A Original
New
Early (before change)
Late (after change)
Late (after change)
Original or new parts may be used in early or late production sets.
Use original parts until exhausted, then stock new parts.
Use original parts until exhausted, then stock new parts.
B Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in early or
late production sets. Use original parts where possible, then stock new parts.
late production sets. Use original parts where possible, then stock new parts.
C Original
New
Early (before change)
Late (after change)
Late (after change)
New parts only may be used in early or late production sets.
Stock new parts.
Stock new parts.
D Original
New
Early (before change)
Late (after change)
Late (after change)
Original parts may be used in early production sets only. New parts may be used in late
production sets only. Stock both original and new parts.
production sets only. Stock both original and new parts.
E
Addition
F
Deletion
G
Other
Ref. No.
Part No.
Part Name & Description
Pcs
Remarks
Notes
Time of change
(Suffix)
Original (Old)
New
-M
-CN
-J
Exterior
22
22
------
PNQT3594Z
Quick Guide Label for KV-S8120/S8130/
S8150
S8150
1
5
---
22
------
PNQT3593Z
Quick Guide Label for KV-S8147/S8127
1
5
---
Feed Tray
72
72
PNUR1087Z
PNUR1087Y
Stopper Spring
2
8
C
Sub Chassis 1(EXIT TRAY)
154
154
PNKS1084Z1
PNKS1084Y1
Exit Extension Tray
1
8
C
Click on the first or last page to see other KV-S8147 / KV-S8127 / KV-S8150 / KV-S8130 / KV-S8120 (serv.man3) service manuals if exist.