Read Panasonic KV-S7097 / KV-S7077 Service Manual online
12
Operation Panel
Power button
Press the power button for more than one second to turn the unit off.
LED (
Red
)
Lights when an error occurs.
LED (
Green
)
Shows the scanner
’
s status.
7-segment LED
If you are using the scanner with Image Capture Plus, you can perform Single Toulch Scanning using the
7-segment LED.
A registered job number is displayed on the 7-segment LED. Use the cursor button (
7-segment LED.
A registered job number is displayed on the 7-segment LED. Use the cursor button (
) to select a job.
Cursor button
Skip button
If you press this button after a double feed or a dog-eared document is detected and scanning has been paused,
the document (or documents) detected as a double feed or the dog-eared document will be scanned, and then
ejected from the scanner. Scanning will continue after the document is scanned and ejected.
the document (or documents) detected as a double feed or the dog-eared document will be scanned, and then
ejected from the scanner. Scanning will continue after the document is scanned and ejected.
Start/Stop button
•
During scanning, pushing this button stops scanning.
•
If you press this button after a double feed or a dog-eared document is detected and scanning has been
paused, the document (or documents) detected as a double feed or a dog-eared document will be ejected from
the scanner without being scanned. Scanning will stop.
the scanner without being scanned. Scanning will stop.
•
If you set [Wait Key] for "Manual Feed Mode" in your application software, pushing this button starts scanning.
For details about "Manual Feed Mode", refer to the Image Capture Plus, TWAIN, or ISIS help.
1
2
3
5
4
6
7
1
2
3
4
5
5
6
7
Click on the first or last page to see other KV-S7097 / KV-S7077 service manuals if exist.