Read Panasonic KV-S7075C (serv.man4) Service Manual Supplement online
12
5 "SECTION 10 TROUBLESHOOTING"
5.1.
“Section 10.3 Requirement After Parts Replacement”
Replaced circuit board assembly or part
Adjustment to be required
Remarks
IC1005 (FLASH memory on CONTROL Board)
1. Adjust Shading.
IC1003 (EEPROM on CONTROL Board) or CONTROL
Board
Board
1. Adjust Shading.
2. Adjust Individual position manually, as required.
3. Execute Double Feed in Sec. 9.3.7 to adjust the
Double Feed Detector's ultrasonic emission level.
4. Set USB ID. (See 9.3.7.)
2. Adjust Individual position manually, as required.
3. Execute Double Feed in Sec. 9.3.7 to adjust the
Double Feed Detector's ultrasonic emission level.
4. Set USB ID. (See 9.3.7.)
5. In Sleep Mode, set the “Standby” condition
to “30 min.” (For KV-S7075C-U Only)
to “30 min.” (For KV-S7075C-U Only)
Starting Sensor or STARTING SENSOR Board
1. Adjust Vertical Position (for Front and Back) and
Length in individual Position or adjust All Position.
Length in individual Position or adjust All Position.
Double Feed Detector (G) or Double Feed Detector (R) 1. Execute Double Feed in Sec. 9.3.7 to adjust the
Double Feed Detector's ultrasonic emission level.
CIS (F)
1. Adjust Shading.
2. Adjust All Position or the following adjustment
should be needed:
a. Adjust Front Vertical Position in Individual
Position.
b. Adjust Front Horizontal Position in Individual
Position.
c. Adjust FB Vertical Position in Individual
Position.
d. Adjust FB Horizontal Position in Individual
Position.
2. Adjust All Position or the following adjustment
should be needed:
a. Adjust Front Vertical Position in Individual
Position.
b. Adjust Front Horizontal Position in Individual
Position.
c. Adjust FB Vertical Position in Individual
Position.
d. Adjust FB Horizontal Position in Individual
Position.
CIS (B)
1. Adjust Shading.
2. Adjust All Position or the following adjustment
should be needed:
a. Adjust Back Vertical Position in Individual
Position.
b. Adjust Back Horizontal Position in Individual
Position.
2. Adjust All Position or the following adjustment
should be needed:
a. Adjust Back Vertical Position in Individual
Position.
b. Adjust Back Horizontal Position in Individual
Position.
Reference Plate (F)
1. Adjust Shading.
Reference Plate (B)
1. Adjust Shading.
Drive Roller
1. Adjust Vertical Position (for Front and Back) and
Length in individual Position, or adjust All Position.
Length in individual Position, or adjust All Position.
Exit Roller
1. Adjust Vertical Position (for Front and Back) and
Length in individual Position, or adjust All Position.
Length in individual Position, or adjust All Position.
Others (when assembling or disassembling parts which
will affect the scanning positions.)
will affect the scanning positions.)
1. Adjust the following adjustment or All Position:
a. Adjust Front Vertical Position in Individual
Position.
b. Adjust Front Horizontal Position in Individual
Position.
c. Adjust Back Vertical Position in Individual
Position.
d. Adjust Back Horizontal Position in Individual
Position.
a. Adjust Front Vertical Position in Individual
Position.
b. Adjust Front Horizontal Position in Individual
Position.
c. Adjust Back Vertical Position in Individual
Position.
d. Adjust Back Horizontal Position in Individual
Position.
Click on the first or last page to see other KV-S7075C (serv.man4) service manuals if exist.