Read Panasonic KV-S7065C (serv.man3) Service Manual Supplement online
4.2.
"Section 9.2 Function item list of Service Utility"
Service Utility item list is as follows.
Note:
When two or more scanners are connected to PC, execute “Select Scanner” to define the scanner before evaluating.
The procedure is as follows.
1. Click “Select Scanner” on the Main Menu.
2. Select the product number and interface of the scanner to evaluate.
Item
Purpose
Remarks
Scanner Status
To indicate scanner status (Ready or Error or Warning)
(2)
Scanner information
To indicate scanner information about Model, firmware version, Gate Array
version, board revision, additional memory size (status), and interface
condition
version, board revision, additional memory size (status), and interface
condition
(2)
Scanner Counter
Update All Counter
To update the values of System Counter, Flatbed Counter, Cleaning roller
Counter, and Replacing roller Counter
Counter, and Replacing roller Counter
(1), (6)
Clear Counter for
cleaning roller
cleaning roller
To clear Counter for cleaning roller to zero after cleaning roller
(1), (6)
Clear Counter for
replacing roller
replacing roller
To clear Counter for replacing roller to zero after replacing roller
(1), (6)
Scanner Condition
Sleep Mode
To set this mode to be enabled or disabled, and to set waiting time before
entering to the sleep mode
entering to the sleep mode
(1)
Clean Imprinter
*1
To clean an ink jet head of imprinter.
(1), (6)
Paper Mode / Buzzer
Setting
Setting
To set scanning size (A4 or Letter) when the Document Guide is in A4
position, and to set Buzzer ON/OFF condition.
position, and to set Buzzer ON/OFF condition.
(1)
Compatible Mode
To make this scanner operate as another scanner with this mode
(1), (3)
User Shading
To execute shading correction at the user side, or to restore the shading data
to the default (Factory-setting).
to the default (Factory-setting).
(4)
Warning Setting
To set warning timing to clean roller and to replace roller
(3)
Set Default
To set “sleep mode setting”, “warning timing to clean and to replace
roller” to the default
roller” to the default
(3)
Test
LED
To light LED on the front panel with colors changing periodically
(Green
(Green
Orange
Red
Green
Orange......)
(5)
Key / Sensor
To do Key or Sensor ON/OFF test.
(5)
Sensor Sensitive Level To check sensitive level of each sensor (Waiting, Starting, Skew (L), Skew
(R), Ending)
(5)
Feed Motor
To check Paper Feed Motor’s Rotating
(5)
Conveyor Motor
To check Conveyor Motor’s Rotating
(5)
Hopper Drive
To check the hopper’s Up/Down Mechanism
(5)
Feed
To check paper feed mechanism.
(5)
Sleep Mode
To check whether sleep mode function works properly
(5)
CIS Level
To check maximum peak level after setting gain
(5)
Double Feed
To check the Double Feed Detector(R)’s level (Response level) after setting
the ultrasonic sending level and frequency of the Double Feed Detector(G)
the ultrasonic sending level and frequency of the Double Feed Detector(G)
(5)
Memory
To execute memory R/W test.
(5)
Adjust
Shading
To execute shading correction
(4)
All Position
To adjust scanning length, vertical and horizontal positions for front and back
sides, flatbed automatically
sides, flatbed automatically
(4)
Individual Position
1. To execute automatic length, vertical or horizontal position adjustment for
front and back sides, flatbed individually
2. To adjust scanning length, vertical and horizontal positions for front and
back sides flatbed manually.
(4)
Double Feed
To correct the Double Feed detector’s ultrasonic sending level and frequency
automatically or manually.
automatically or manually.
(4)
Other (USB ID,
Save Information)
Save Information)
USB ID
To set a USB ID for the scanner, connected to PC.
(3)
Save Information
To save scanner and PC information.
(1)
Note:
*1
: This item is available only in case installing Imprinter (Option) to scanner KV-S7065C Series.
Remarks
(1) Parameter setting by user
(2) Status indication
(3) Parameter setting by service person
(4) Adjustment
(5) Diag.
(6) Maintenance
9
KV-S7065CSERIES
Click on the first or last page to see other KV-S7065C (serv.man3) service manuals if exist.